RADWIN


Radwin 5000 Jet Series Beam Forming Antenna

RADWIN 5000 JET is a disruptive point-to-multipoint solution incorporating a smart beamforming antenna and advanced air interface. JET’s antenna beam cancels radio interference and enables operation in heavily congested unlicensed bands and in non-line-of-sight (NLOS) conditions, delivering the highest actual capacity for longer range than any other point-to-multipoint system in the industry.

Product Features

  • Item Code: RADWIN 5000 JET
  • Base station with smart beamforming antenna
  • Variety of subscriber units – 10, 25, 50 Mbps upgradable to 100 Mbps
  • Up to 250 Mbps per sector, 1 Gbps per cell using 2 x 40MHz
  • Long range – 40 Km / 25 miles
  • Interference cancellation due to directional narrow beam antenna
  • Guaranteed SLA per subscriber unit

Radwin 2000 D Series Radios Deliver

RADWIN 2000 D+ Series radios deliver up to 750 Mbps throughout, making them the ideal backhaul solution where fiber is unavailable or cost-prohibitive.

Product Features

  • Item Code: Radwin 2000 D
  • Net throughput: 750 Mbps
  • Frequency availability: 5.1 – 6.0 GHz
  • Smart Dynamic Channel Bandwidth Selection feature: 20/40/80 MHz
  • Advanced and proven air interface
  • Seamless operation in NLOS and severe multipath conditions
  • Radio frame synchronization enabling co-located radio deployments

Radwin 2000 A Series Radios Deliver

RADWIN 2000 A Series radios deliver up to 50 Mbps net throughput and support up to 8 E1s/T1s. The series is available in 3 models: 10, 25, 50Mbps, supporting 2, 4, 8 E1s/T1s respectively. The series is upgradable to 100 Mbps.

RADWIN 2000 A series radios are ideal for carrier access applications that require SLAs and for private networks seeking a carrier-class solution.

Product Features

  • Item Code: Radwin 2000 A
  • Up to 10 or 25 or 50 Mbps net throughput, upgradable to 100 Mbps
  • Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
  • Small form factor for city deployments
  • Asymmetric capacity; fixed or dynamic channel allocation
  • Connectorized or integrated antenna unit

Radwin 2000 B Series

RADWIN 2000 B Series radios deliver up to 50 Mbps and up to 8 E1s/T1s, and the radios are upgradable to 100 Mbps and 200 Mbps. Delivering IP and TDM over the same link enables customers to benefit from seamless migration from legacy TDM to all-IP networks.

Product Features

  • Item Code: Radwin 2000 B
  • Up to 50 Mbps net throughput, upgradable for up to 200 Mbps
  • Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
  • Integrated high gain antenna or connectorized unit with an embedded antenna
  • Asymmetric capacity; fixed or dynamic channel allocation
  • Single radio supporting 2.2-2.4 or 4.9-6.0 or 5.9-6.4 GHz
  • QoS and VLAN capabilities

Radwin 2000 C Series

Reaching 200 Mbps net throughput and providing IP and TDM over the same link make these radios ideal for today’s and tomorrow’s networks, enabling seamless migration from legacy TDM to all-IP networks such as LTE/4G.

RADWIN 2000 C Series radios operate in both symmetric and adaptive asymmetric mode – whereby capacity is dynamically allocated between the uplink and the downlink based on traffic loads and air-interface conditions. Extremely simple to install and maintain, systems operate flawlessly in the most challenging environments, including non-line-of-sight scenarios, interference-ridden environments and extreme temperatures.

Product Features

  • Item Code: Radwin 2000 C
  • Up to 200 Mbps net throughput
  • Native TDM (up to 16 E1s/T1s) + Ethernet over the same link
  • Long range – up to 120 Km/75 miles
  • Single radio supporting 2.2-2.4 or 3.3-3.8/3.65 or 4.4-5 or 4.9-6 or 5.9-6.4 GHz
  • QoS and VLAN capabilities
  • Asymmetric capacity – fixed or dynamic channel allocation
  • Low latency < 3msec
  • Connectorized or integrated antenna units