Our purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Our purlins are used on the roof, girts are used on the walls and eve struts at the intersection of side walls and roofs.
Our purlins, girts and eave struts are designed in accordance of the American Iron and Steel Institue (AISI) then cold formed design manual.
Our sections may be used over single spans unlapped continuous and lapped continuous span in multi bay buildings.
Our Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized
Material Specification
- IS 513/IS 277/IS 10748/IS 1079
- G240 MPA/G340 MPA/G550 MPA, Z 120 GSM/Z 275 GSM & Z 180 GSM
- G indicates Yield Strength in MPA & Z indicates Coating Mass in G/M2
Steel Grade
Zed & CEE Purlins with punching
Thickness
- Sleeves
- Cleats
- Sag rods
HR Purlins
- Yield Strength – 240 MPA
- Option – Redoxide Primer Coating
GI Purlins
- Coating Mass – 120 GSM / 180 GSM / 275 GSM
- Yield Strength – 240 MPA / 340 MPA / 550 MPA