Our Products


Light Guage / Low Cost Building System

Cold formed steel is shaped by guiding thin sheets of steel through a series of rollers, each roller changing the shape very slightly, with the net result of converting a flat sheet of steel into a C or S-shaped section.

The steel used here is coated with zinc (called galvanized) or a mixture of zinc and aluminium (called zincalume or galvalume by some) to protect it from corrosion. The thicknesses of steel used here range from about 1 to 3mm for structural sections, and 1 to 2mm for non-structural sections. The members are sized to roughly correspond to wood members: 2″x4″ and 2″x6″ are common sizes, manufacturers to produce light-weight but high tensile steel sheets


Hot Dip Galvanized

Z & C Purlins are available with manual and as well as automatic control panels. We provide these products in various thicknesses with similar depth for same structure, which assure cost-effective prices for the structure. These Purlines are manufactured and supplied by us. These are the most suitable for building and construction than other conventional Pulines


Sigma Purlins

SIGMA SECTION /purlins are accurately roll formed from high strength steel to provide an efficient, light weight and economical roofing and cladding support system for structural steel buildings. SIGMA SECTION /purlins are quick to install and suitable for both insulated and noninsulated roofs and walls.
The thickness and height of the purlin selected depend on span length and loads.


Z and C Purlin / Section

Our purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Our purlins are used on the roof, girts are used on the walls and eve struts at the intersection of side walls and roofs.

Our purlins, girts and eave struts are designed in accordance of the American Iron and Steel Institue (AISI) then cold formed design manual.

Our sections may be used over single spans unlapped continuous and lapped continuous span in multi bay buildings.

Our Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanize


Shear Connectors

Composite structures consist of two different materials joined together in such a way that the resultant strength of the structure is more than the strength of the two materials added together. Due to this composite structure can make best use of each of the constituent materials. In steel and concrete composite beams, concrete is assumed to take most of the compression load while steel takes all the tension. The two materials in the composite structure need to be firmly held together to make the structure rigid and strong.


Mezzanine Systems

We provide mezzanine floors for industrial buildings. Mezzanine floors are a key part to our business enabling to maximize your productive floor space by doubling its capacity. These structures are usually free standing and in most cases can be dismantled and relocated.


Flordec Sheets

The floor is constituted by a profiled sheet onto which a layer of concrete is poured. The sheet is bonded to the concrete by means of mouldings on the sheet which stop the concrete from slipping horizontally and detaching vertically. When the concrete is poured and until it has reached an appropriate level of hardening.


Steel Decking Sheets

Trapezoidal Metal Profile sheets with strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.


Cold Storage Wall Panels

Cold storage Panels are a range of self-supporting metal panels with PIR and with a web joint for the construction of positive/negative temperature for cold storage rooms. The panel has been designed to provide a complete solution to the requirements of the cold storage industry.


Non Walkable Ceiling

A non-walkable ceiling system is fully flexible and allows uninstallation of each individual panel separately in very short period of time. Joints between the panels are sealed with special silicone seal, meeting the requirements of internationally accepted standards Good Manufacturing Practices and FDA.
According to the requirements of each individual project, all necessary cut-outs for implementation of lights and air conditioning devices are prepared already in our production site. Such detailed engineering ensures best quality and an efficient on-site installation process.


Walkable Ceiling

Walkable Ceiling provides the important advantage of a walkable platform during construction and safe maintenance access above the ceiling after completion. These ceilings are designed with a flush, monolithic Current Good Manufacturing Practices finish on the cleanroom side and eliminates or minimizes the need for expensive catwalks and mezzanines above. Customers appreciate safe, easy maintenance, and Good Manufacturing Practices compliance offered by the our Ceiling System.


Progressive Clean Room Wall Panels

Wall panels systems are ideal for applications with significant bulk heading requirements, and anti-static wall systems.
An all-purpose modular clean room system, features various thick wall Panels that can be utilize for a wide variety of wall partition.These panels can be used to outfit existing facilities or create freestanding envelope structures.


Wall Panels

Aluminum honeycomb panels tend to be the most popular wall panels chosen for microelectronics cleanrooms.
Pharmaceutical applications require panels that can be washed continuously without breaking down while architectural finishes withstand repeated cleaning and sanitization with various chemicals to resist microbial and fungal growth.
Panel cores are available in expanded polystyrene, honeycomb, Rockwool , PUF


Sliding Door

A sliding door is a type of door which opens horizontally by sliding, usually parallel to a wall. Commonly recommended for heavy duty use in cold/freezer rooms and hygiene process areas due to its light weight and greater in efficiency, better in performance. Also, In terms of safety, long service Life and smooth in operation every day. The exterior and interior surfaces are made by polyester coated steel sheets. These doors are manufactured as per the industrial quality standards and are supplied to clients at leading market prices. The door leaf is injected with 40 kg/cum density CFC free polyurethane. Our Sliding doors are offered with view glass and accessories. The door installation will be done at site only. These are available in various shapes and sizes to clients as per their requirements. These are priced economically.


Hatch Doors

These doors are commonly recommended for energy saving. Hatch doors are very useful and sufficient in cold/freezer rooms where the entire door need not to be opened. Accessibility through the small hatch doors ensures that energy is not lost. These doors are manufactured as per the industrial quality standards and are supplied to clients at leading market prices. The door leaf is injected with 40 kg/cum density CFC free polyurethane. Our Hatch doors are offered with accessories as fully assembled unit. The door installation will be done at site only. These are available in various shapes and sizes to clients as per their requirements. These are priced economically.


Face Mounted Door

Commonly recommended for clean rooms and process areas due to its light weight and sturdy construction with plain dust free surface finish. Easy to operate with accessories like lock, hinges and door closure esthetically designed to merge into any ambience. Our industrial doors are offered with view glass and accessories as a fully assembled unit.


Semi Flush Doors

These doors are equipped with automatic closing hinges. Full flush doors finds extensive use in the industrial storage requirements where the number of operations of the door per day is high. (Door and door frame surface level is different that means 20mm projection is there).


Fully Flush Doors

These doors are equipped with automatic closing hinges. Full flush doors finds extensive use in the industrial storage requirements where the number of operations of the door per day is high. (Door and door frame surface level will be same).


Cold Room Doors

We offer our clients a qualitative range of cold room door which is simple in design, easy to install, highly functional, ready to use and robust in construction. Made from food grade stainless steel or PCGI sheets with Puf. These are available in standard sizes for low & high temperature applications. The door leaf is injected with 40 kg/cum density CFC free polyurethane. These are also equipped with hi-tech hardware like hinges, latches with handle and emergency exit locks. Highly recommended for chill / freezer rooms, controlled temperature chambers and ripening rooms for trouble free performance. Known for their outstanding strength, rigidity, excellent thermal and acoustical performance, these Hinged Doors are provided by us at most competitive rates.


Cold Room

We are one of the trusted manufacturers of cold rooms, walk- in coolers & Freezers that are specially designed for chilling or freezing applications. The refrigeration systems facilitate efficient cooling, freezing of the chamber integrated with user-friendly structure and design. Available in various capacities, these freezers are provided with pre-fabricated panels for easy assembly, cam lock and tongue and groove assembly. These freezers find wide application in food processing, fisheries, hotels, hospital, horticultural, agricultural, research & Development and Pharmaceutical Industries.


Scientific Door

We ask this question at every stage of business execution and define all our actions to match, positively to the spirit of this question. This enables us to offer the best possible solution to our clients. The client-satisfaction helps our, Enterprises to grow from the present level and enter the future with a hl design standards as well as the engineering norms pertinent to PEB industry in all projects.


Acoustic Door

Acoustic door is essential whenever high sound reduction performance is required between noise sensitive areas. By the Introduction of special linings, seal and structuarally bonded cores, a high leval of sound reduction is achieved. these Doors are used in Recording Studios, Theaters and Auditoriums.


Clean Room Doors

Cleanroom doors can be configured as single/double swing-out or as horizontal sliding either manual, automatic or semi-automatic. For pharmaceutical door panels we assemble with the same panels of the wall system. Swing out doors are designed to fit flush with both sides of the wall panel system and are supplied in several dimensions. Our products are sold to a wide variety of industries across the globe. In addition to standard products we offer wide flexibility to meet unique and unusual needs. Our staff are of experienced professionals which specialize in providing the most effective solutions for any given cleanroom application.


Multipurpose Doors

We offers wide range Multipurpose Door in the market. These doors are manufactured using superior quality steel. The doors offered by us are ideal to be installed in various industrial establishments. we also offer exclusive range of heavy duty industrial steel doors with or without glass safety Panels and custom hardware, These industrial steel doors can be manufactured& supplied with pre-installed glass and hardware, as per the specific requirements of our clients. These industrial steel doors are widely appreciated their quality and durability.


Fire Rated Doors

Fire Rated Doors is of acute importance in buildings and areas needing to compartmentalize and hold the spread of fire. While the cause of fire could be arson, short circuit, gas leakage or sheer negligence, the range of passive fire doors are designed to restrict their spread and save lives. Fire doors are designed to protect life in event of a fire. For this, the door must serve as a fire and smoke barrier.

Studies have shown that more people have lost lives due to smoke suffocation while fire. These doors are available with rockwool core as standard infill material. These doors are rated for 60 and 120 minutes fire withstanding ability. All fire doors are factory finished with epoxy primer and polyurethane finish paint / Powder Coated


Standing seam sheets

Standing seam roofing is the most reliable roofing material. The risk of leakage is excluded due to concealed fixing, reliable seaming, and absence of through holes. Standing seam roofing blends into architectural character of cities thus being applied for new building construction as well as for remodeling and renovation.


Light weight aluminium colour coated roofing sheet

Aliminium is replacing conventional roofing materials across industries with kind of characteristics it displays, aluminium has become the first choice across segments for residential and industrial applications today. It provides aluminium roofing materials for those who need lonh-lasting protection. Our Aluminium roofing sheets are of exceptional quality and are reliable. We offers ideal and economial solution for all your roofing needs.


Clip Lock Sheet

The sheets are produced and installed at site without any supports like Trusses, Purlins or any other structural memberance. Provides larger enclosed volumes, free movement and effective handling of goods and higher utilization. Self supported roofing sheets have created a revolution in the industry as these roofing sheets do not require any kind of support. Our roofing sheets uses mechanical sealing and installed without any holes, nuts, bolts, overlaps or sealants thus reducing on maintenance cost and maximizing on corrosion resistant property. With no need of making holes, drilling nuts and bolts, the overall time for installation lowers down remarkably thus increasing the efficiency with faster project turnaround.


Self Supported Roofing Sheet

The sheets are produced and installed at site without any supports like Trusses, Purlins or any other structural members. It Provides larger enclosed volumes, free movement, effective handling of goods and higher utilization. Self supported roofing sheets have created a revolution in the industry as these roofing sheets do not require any kind of support. Our roofing sheets uses mechanical sealing and installed without any holes, nuts, bolts, overlaps or sealants thus reducing on maintenance cost and maximizing on corrosion resistant property. With no need of making holes, drilling nuts and bolts, the overall time for installation lowers down remarkably thus increasing the efficiency with faster project turnaround.


Bare Galvalume sheet

Our Bare Galvalume Roofing Sheet are available in numerous sizes, designs and colors and are in extensively demanded in homes, restaurants, hotels and many other places. Further our quality auditors test this sheet on set parameters to ensure a flawless product from our end and retain customer’s permantantly. Our products are of rugged design, excellent strength, durable and easy to install. The combination of zinc and aluminum in Galvalume which enhances both the positive and negative effects of aluminum. Galvalume has barrier corrosion resistance and heat resistance similar to aluminized material and good bare edge galvanic protection and forming qualities like galvanized material.


Wall Panels Partitions For Industrial

The “All in One” In Plant partition Wall System Whether you need to create office space in your factory, enclose a powder coating operation, or divide plant space from floor to ceiling, Our Pre engineered wall partition will have a wall system for your need.
Our modular wall systems are ideal for creating in-plant demising walls quickly and cost effectively due to the minimal waste and shorter installation time frame compared to traditional construction materials. Plus, their modular design allows these wall systems to be moved or re-located – a perfect solution that adapts with changing business needs.


Puf Slabs

PUF slabs are the most economical thermal insulation rigid Polyurethane Foam Materials for various applications in building and all types of industries. PUF Slabs of various thicknesses are preferred for insulating the buildings Also any kind of construction where the temperature and energy savings are more concern to us, it is the first choice. The applications of these slabs are primarily in Cold Storages, Freezer Rooms and on a very large scale for insulting the roofs and Walls of the civil buildings.


Camlock Panels

Specially designed eccentric lock mechanism ensures airtight between joints. Tongue and groove with specially designed cam locks provided. The cam lock fasteners come in pairs, a male cam lock latch and a female cam lock pin. Insulated panels are joined together in required lengths to assemble peripheral walls, partition walls, ceilings and floor. It is well designed Tongue & Groove system which utilizes the Cam locks to achieve superior tightness and uniform line.


Sandwich PIR/Fire Retardant Roof/Wall Panel

Sandwich PIR panels’ roof panels are combining low thermal conductivity ratio and good fire performance, this energy efficient PIR core panel both saves on heating costs and increases fire safety. Thanks to low weight this panel also offers savings on supporting structures as well as on freight and assembly costs. Ideal way to insulate any home or industrial premises and give higher thermal resistance is to have it insulated through particular roof insulation material.


Fireproof Rockwool Panel

The top and bottom of Rockwool sandwich panel is galvanized pre-painted steel. Core material is rock wool with density at 100kg/m3, the rock wool is upright against the surfaces. There are high strength vesicant between rock wools and surfaces. This product is featured with full anti-firing, more heating and sound insulation. It is widely used as the wall or roof for cold storage, industrial workshop, public building etc.


Insulated EPS Sandwich Panels

Polystyrene Sandwich Panel also called EPS Sandwich Panel. The top & bottom Surface of this panel is Galvanized & pre-painted steel sheets, core material is polystyrene, it is formatted by laminating and pressing with 2 components PU glue. The sandwich panel is featured with temperature keeping, hot & sound insulation, anti water and fire resistant. It is widely used as the wall or roof for cold storage, industrial workshop, public building etc.


Cooling Puf Wall Panels

Our manufacture PUF sandwich panel for wall & ceiling panel.
The raw material used for manufacturing PUF panel is CFC free and fire retarded grade. Panels are provided with Tongue & Grove joints and specially designed Cam locks to enhance airtight assembly. PUF Sandwich panels are available with pre coated GI sheets, SS sheets or as directed.
The standard density is 40 Kg. ± 2 Kg. m3. Also available in different density.


Cooling Puf Roof Panels

“World’s Best Manufacturing Process with continuous Production line for Sandwich PUF/PIR Panels.”
Metal-faced polyurethane sandwich panels are the system of choice of today for large industrial buildings refrigerated warehouses,office blocks,exhibition halls,fair pavilions,schools and sports halls.
The aluminium or steel facings themselves are surface coated and can be manufactured with profiles of various depths leading to a higher load bearing.


Polycarbonate Sheet

Polycarbonate sheets are environment friendly green global product. Strip lights can be combined into any architectural structure. It can be used in all buildings to ensure uniform lighting. Light transmission is 40% to 72% in embossed and 40% to 90% in solid compact sheet.


Reflective Thermal Insulation

Our Cell insulation offers industrial shed owners an extremely durable & high performance insulation medium that resists rodents, insects etc. and can be washed as required. The fibre free and thermo reflective construction of our product is made to resist tearing. It also replaces fibre based insulation blanket in all agricultural and industrial shed applications where it is installed quickly and often without the use of product support mesh.


Louvers

We manufacture Louvers as per industrial standard. Louvers can enhance a building architectural look and meet ventilation air movement requirements. Our louvers are extensively used in providing ventilation solutions. We are offering our clients high quality range of colour coated/non coloured Louvers. Louvers designed for both fresh air intake and exhaust air applications.


Turbo Ventilators

Turbo ventilators are designed and engineered to exhaust Industrial pollutants such as smoke, dust, poisonous gases, humidity, fumes, heat and many more invisible irritants from the covered area. Turbo ventilator provides a safe, cool, healthier and more controlled environment by removing the entrapped heat and industrial emission ensuring the health of workers, thus contributing to an increase in workers productivity. Turbo Ventilators provide energy free cooling and fresh air through out the year.


Pre fab multi storey steel building system

Thanks to its wide range of benefits, steel is the preferred material of construction in the commercial sector. Added to this, steel-framed systems provide a high level of pre-fabrication. Thus they can be used for projects within the city, guaranteeing high speed of construction and minimum on-site storage of materials. Steel enables builders to offer buildings of high quality,flexibility and energy efficiency,while ensuring high speed construction. Therefore, steel commands over 70% market share worldwide.


Pre Engineered Building

The Pre-engineered building system is one of the fast growing segments globally. It has all the attributes of what the modern life-style demands, i.e., speed, quality and value. there are many applications for pre-engineered buildings. it can be automobile garage to aircraft hangar, bakery to dairy farm, auditorium to hospital, and factory to community hall.


Optronix 1 GE ONU

Conform to IEEE802.3ah standard
Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services.
Support frame filtering and suppression
Support standard 802.1Q VLAN function, support VLAN conversion
Support 4094 VLANs (802.1Q)
Support Dynamic Bandwidth Allocation (DBA) function
Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc…

Product Specification:

  • Single ONU supports up to 8 LLID
  • Support IGMP Snooping

  • Support Ethernet port rate-limit loop detection

  • Support power failure alarm

  • Support lightning protection for power supply and lightning protection for service port

Optronix 8 PON OLT

GEPON–EX-1108 OLT 8PON Ports 1U – OLT provides 8GE (copper) and 8SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GEPON-EX-1108 OLT provides 8GE (copper) and 8SFP slots Combo interface for uplink, and 8 EPON ports for downstream. It can support 512 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1108
  • Interface: Eight Gigabit Combo ports, Eight optical ports
  • PON port: Eight 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Eight fixed PON slots with 1:64 splitting ratio at most

Optronix 4 PON OLT

GEPON–EX-1104 OLT 4PON Ports 1U – OLT provides 4GE (copper) and 4SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GEPON–EX1104 OLT provides 4GE (copper) and 4SFP slots Combo interface for uplink, and 4 EPON ports for downstream. It can support 256 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1104
  • Interface: Four Gigabit Combo ports, Four optical ports
  • PON port: Four 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Four fixed PON slots with 1:64 splitting ratio at most

Optronix 2 PON OLT

2PON OLT is the EPON OLT optical line terminal equipment. It can support 2 EPON PON ports and connect 128 ONU at most (by 1:64 splitter), and provides 2 uplink GE optic SFP slots and 2 uplink copper SFP slots.

GEPON-EX-1102 OLT provides 2GE (copper) and 2SFP slots Combo interface for uplink, and 2 EPON ports for downstream. It can support 128 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1102
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

16 PON OLT

GOPON – 16 OLT 16 PON Ports 1U – OLT provides 16 GE (copper) and 16 SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON-16OLT provides 16GE (copper) and 16SFP slots Combo interface for uplink, and 16 EPON ports for downstream. It can support 1024 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON–16OLT
  • Interface: Sixteen Gigabit Combo ports, Sixteen optical ports
  • PON port: Sixteen 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Sixteen fixed PON slots with 1:64 splitting ratio at most

8 PON OLT

GOPON – 8 OLT 8PON Ports 1U – OLT provides 8GE (copper) and 8SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON-8OLT provides 8GE (copper) and 8SFP slots Combo interface for uplink, and 8 EPON ports for downstream. It can support 512 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON–8OLT
  • Interface: Eight Gigabit Combo ports, Eight optical ports
  • PON port: Eight 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Eight fixed PON slots with 1:64 splitting ratio at most

4 PON OLT

GOPON – 4 OLT 4PON Ports 1U – OLT provides 4GE (copper) and 4SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON – 4OLT provides 4GE (copper) and 4SFP slots Combo interface for uplink, and 4 EPON ports for downstream. It can support 256 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON – 4OLT
  • Interface: Four Gigabit Combo ports, Four optical ports
  • PON port: Four 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Four fixed PON slots with 1:64 splitting ratio at most

2 PON OLT

GOPON – 2 OLT 2PON Ports 1U – OLT provides 2GE(copper)and 2SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLTare small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON – 2OLT provides 2GE(copper)and 2SFP slots Combo interface for uplink, and 2 EPON ports for downstream. It can support 128 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON – 2OLT
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

2 PORT OLT – OP-EOLT-97042P

OP-EOLT 97042P is the GEPON OLT optical line terminal equipment. It can support 2 GEPON PON ports and connect 128 ONU at most (by 1:64 splitter), and provides 2 uplink GE optic SFP slots and 2 uplink copper SFP slots.

OP-EOLT 97042P built-in powerful switch modules, supporting full-duplex forwarding, powerful layer-2 protocols.

Product Specification:

  • Item Code: OP-EOLT_97042P
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

SFP Transceiver – 40km 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 8/0KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 40K-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and PIN photo-detector
  • Up to 80km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation
  • Metal enclosure, for lower EMI

SFP Transceiver – 80Km 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 8/0KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 80S-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and PIN photo-detector
  • Up to 80km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation

SFP Transceiver – 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 120KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 125S-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and APD Receiver
  • Up to 120km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation

SFP Transceiver – 155Mbps BIDI

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with SONET OC-3 and SDH STM-1.They are RoHS compliant and lead-free.

Product Features:

  • Item Code: BIDI155
  • Single LC receptacle optical interface compliant
  • Hot-pluggable SFP footprint
  • 1310nm FP laser transmitter
  • RoHS compliant and Lead Free
  • Up to 20 km on 9/125um SMF

Onu 1ge Port – Op-eonu 92001z Modems

OP-EONU 92001Z provides one 10/100/1000Mbps base-T interface, one optical interface. It is suitable for home and small business users. It can meet the FTTH high-speed data transmission of the application.

Product Specification:

  • Item Code: 92001Z
  • User interface : 1 10/100/1000M RJ45 port.
  • Transmission speed: upstream/downstream symmetrical 1Gbps
  • Network coverage radius: 20KM
  • Optical receive sensitivity: ≥-26dBm
  • Luminous power: 0dBm

24 Port Giga 4 Port SFP GbE L2 Managed Switch

S4600 is L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation etc), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. S4600 switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design feature, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users.

Product Features:

  • Item Code: DCN-S4600
  • Loop Detection
  • Broadcast Control
  • DHCP Server
  • VLAN
  • ACL
  • IGMP

Dual Fiber Media Converter – OL-4005 D 20

The10/100M auto-negotiation media converter can achieve the conversion between 10BASE-T or 100BASE-TX 100BASE-FX, extending the transmission distance of legal 10M Ethernet or 100M Fast Ethernet upto 100Km though Single mode optic fiber.

Product Specification:

  • Item Code: OL-4005-D
  • Standards: IEEE 802.3U,IEEE 802.1d
  • Wavelength: 1310nm
  • Power: External Power 5V Dc/1A, Internal 220V/1A
  • Environment: 0- 50 deg C
  • LED Indicator: Power, Link/ACT, Speed and FDX/Col, Link/ACT FDX
  • Dimension: 102mm x 74mm x 22mm(External Power supply)

OL-4005 G SFP/ OL-4050 G SFP

Gigabit media converter fulfills the conversion between 10/100/1000 BASE-T 1000 BASE-FX or vice versa, extending the transmission distance of Ethernet.

Product Specification:

  • Item Code: OL-4050_G_SFP
  • Power (Option): External Power 5V DC, Internal 220V-1A, Internal 48V DC
  • Environment: 0- 50 deg C
  • LED Indicator: Power, Link/ACT, Speed and FDX/Col, Link/ACT FDX
  • Certificates: CE FCC-Class A

Fiber Patch Cords

We supply fiber optic patch cord , fiber optic patch cable , LC,SC/APC,ST, E2000/APC,MU, VF45,FC, MT-RJ, SC, MPO, Volition,MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon,FDDI,RoHS compliant,LSZH,Riser,Plenum,OFNR,OFNP,simplex, duplex,single mode,9/125,SM, multimode,MM, 50/125, 62.5/125.


10G XFP Cable

10G XFP Cables were developed to provide 10Gb/s serial links for a wide range of applications including standards such as OC192/STM-64, G.709, and 10 Gigabit Ethernet, 10G Fibre Channel, and other industry standards. It is ideally suited for 10 GbE datacom (belly-to-belly for high density applications) and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards. Syrotech’s XFP Cables is a low cost XFP solution. XFP directly attached twinax cable assemblies are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. Transmitter and receiver are separate within a wide temperature range and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities. It is compliant to XFP MSA.


10G SFP Cable

10G SFP+ Cables offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet and service provider transport applications, such as switches, routers, media converters, and other data communication equipments. It is a popular industry format supported by many networks and switch vendors.


XENPAK Transceivers

Syrotech is a leading supplier of XENPAK transceivers. We have a large selection of XENPAK transceivers in stock and can ship the XENPAK transceivers to you within 24 hours. All of our XENPAK transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the XENPAK transceivers to work in your system and all of our XENPAK transceivers come with a lifetime advance replacement warranty.


XFP Transceivers

Syrotech is a leading supplier of XFP transceivers. We have a large selection of XFP transceivers in stock and can ship the XFP transceivers to you within 24 hours. All of our XFP transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the XFP transceivers to work in your system and all of our XFP transceivers come with a lifetime advance replacement warranty.


X2 Transceiver

Syrotech is a leading supplier of X2 transceivers. We have a large selection of X2 transceivers in stock and can ship the X2 transceivers to you within 24 hours. All of our X2 transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the X2 transceivers to work in your system and all of our X2 transceivers come with a lifetime advance replacement warranty.


GBIC Transceivers

Syrotech is a leading supplier of GBIC transceivers. We have a large selection of GBIC transceivers in stock and can ship the GBIC transceivers to you within 24 hours. All of our GBIC transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the GBIC transceivers to work in your system and all of our GBIC transceivers come with a lifetime advance replacement warranty..


SFP Modules – Transceiver

Syrotech is a leading supplier of SFP transceivers. We have a large selection of SFP transceivers in stock and can ship the SFP transceivers to you within 24 hours. All of our SFP transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the SFP transceivers to work in your system and all of our SFP transceivers come with a lifetime advance replacement warranty.


Fiber Media Converter – Dual

GOMC-1303-20 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 20km on dual fiber optic.

10/100Mbps auto-sensed, easily upgrade

Product Features

  • Item Code: GOMC-1303-20
  • Full-duplex and half-duplex auto-sensed
  • MDI/MDI-X Auto Negotiation
  • 10/100Mbps store-and-forward
  • 100Mbps cut-through transmission
  • Packet size up to1518bytes
  • Supporting VLAN / VoIP /QoS packets

Fiber Media Converter – Single

GOMC-BI3503-20/5303-20 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 20km single fiber optic cable.

Product Features

  • Item Code: GOMC-BI3503-20/5303-20
  • Full-duplex and half-duplex auto-sensed
  • MDI/MDI-X Auto Negotiation
  • 10/100Mbps store-and-forward
  • 100Mbps cut-through transmission
  • Packet size up to1518bytes
  • Supporting VLAN / VoIP /QoS packets

Radwin 5000 Jet Series Beam Forming Antenna

RADWIN 5000 JET is a disruptive point-to-multipoint solution incorporating a smart beamforming antenna and advanced air interface. JET’s antenna beam cancels radio interference and enables operation in heavily congested unlicensed bands and in non-line-of-sight (NLOS) conditions, delivering the highest actual capacity for longer range than any other point-to-multipoint system in the industry.

Product Features

  • Item Code: RADWIN 5000 JET
  • Base station with smart beamforming antenna
  • Variety of subscriber units – 10, 25, 50 Mbps upgradable to 100 Mbps
  • Up to 250 Mbps per sector, 1 Gbps per cell using 2 x 40MHz
  • Long range – 40 Km / 25 miles
  • Interference cancellation due to directional narrow beam antenna
  • Guaranteed SLA per subscriber unit

Radwin 2000 D Series Radios Deliver

RADWIN 2000 D+ Series radios deliver up to 750 Mbps throughout, making them the ideal backhaul solution where fiber is unavailable or cost-prohibitive.

Product Features

  • Item Code: Radwin 2000 D
  • Net throughput: 750 Mbps
  • Frequency availability: 5.1 – 6.0 GHz
  • Smart Dynamic Channel Bandwidth Selection feature: 20/40/80 MHz
  • Advanced and proven air interface
  • Seamless operation in NLOS and severe multipath conditions
  • Radio frame synchronization enabling co-located radio deployments

Radwin 2000 A Series Radios Deliver

RADWIN 2000 A Series radios deliver up to 50 Mbps net throughput and support up to 8 E1s/T1s. The series is available in 3 models: 10, 25, 50Mbps, supporting 2, 4, 8 E1s/T1s respectively. The series is upgradable to 100 Mbps.

RADWIN 2000 A series radios are ideal for carrier access applications that require SLAs and for private networks seeking a carrier-class solution.

Product Features

  • Item Code: Radwin 2000 A
  • Up to 10 or 25 or 50 Mbps net throughput, upgradable to 100 Mbps
  • Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
  • Small form factor for city deployments
  • Asymmetric capacity; fixed or dynamic channel allocation
  • Connectorized or integrated antenna unit

Radwin 2000 B Series

RADWIN 2000 B Series radios deliver up to 50 Mbps and up to 8 E1s/T1s, and the radios are upgradable to 100 Mbps and 200 Mbps. Delivering IP and TDM over the same link enables customers to benefit from seamless migration from legacy TDM to all-IP networks.

Product Features

  • Item Code: Radwin 2000 B
  • Up to 50 Mbps net throughput, upgradable for up to 200 Mbps
  • Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
  • Integrated high gain antenna or connectorized unit with an embedded antenna
  • Asymmetric capacity; fixed or dynamic channel allocation
  • Single radio supporting 2.2-2.4 or 4.9-6.0 or 5.9-6.4 GHz
  • QoS and VLAN capabilities

Radwin 2000 C Series

Reaching 200 Mbps net throughput and providing IP and TDM over the same link make these radios ideal for today’s and tomorrow’s networks, enabling seamless migration from legacy TDM to all-IP networks such as LTE/4G.

RADWIN 2000 C Series radios operate in both symmetric and adaptive asymmetric mode – whereby capacity is dynamically allocated between the uplink and the downlink based on traffic loads and air-interface conditions. Extremely simple to install and maintain, systems operate flawlessly in the most challenging environments, including non-line-of-sight scenarios, interference-ridden environments and extreme temperatures.

Product Features

  • Item Code: Radwin 2000 C
  • Up to 200 Mbps net throughput
  • Native TDM (up to 16 E1s/T1s) + Ethernet over the same link
  • Long range – up to 120 Km/75 miles
  • Single radio supporting 2.2-2.4 or 3.3-3.8/3.65 or 4.4-5 or 4.9-6 or 5.9-6.4 GHz
  • QoS and VLAN capabilities
  • Asymmetric capacity – fixed or dynamic channel allocation
  • Low latency < 3msec
  • Connectorized or integrated antenna units

Panel Antenna 5Ghz 23dbi Outdoor

The TL-ANT5823B 5GHz 23dBi outdoor panel antenna is ideal for outdoor use by attaching to your wireless access points/routers which operate on less crowded 5GHz band, It could be used for long distance point-to-point connection, providing your stable wireless links. It is very easy to use, no con­figuration or software installation required.

Product Specification

  • Item Code: TL-ANT5823B
  • Frequency: 5.15~5.85GHz
  • Impedance: 50 Ohms
  • Gain: 23dBi
  • VSWR(MAX.): ≤1.5
  • HPOL Beamwidth: 12
  • VPOL Beamwidth: 12
  • Polarization: Vertical or Horizontal

Wireless CPE 300Mbps 5Ghz – WBS510

TP-LINK’s 5GHz 300Mbps Outdoor Wireless Base Station is specifically designed to provide an effective solution for outdoor wireless networking applications. With its centralized management platform and high degree of flexibility, it is the ideal choice for providing point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage. The TP-LINK Outdoor Wireless Base Station pairs professional performance with user-friendly design, making it the perfect solution for both business and home users.

Product Specification

  • Item Code: WBS510
  • Compatibility: 802.11 a/n
  • Wireless Speed: 300Mbps
  • Transmit Power: 27dBm
  • Maximum Transfer distance: 50+km
  • MIMO: Yes
  • Weatherproof Enclosure: IP65
  • ESD Protection: 15kV

Sector Antenna 19DBI – TL-ANT5819MS

The Pharos Sector Antenna features 2×2 MIMO technology, is suitable for outdoor use, and is ideally paired with a Pharos Base Station. These antennas feature high-gain directional transmission and represent an excellent solution for providing long distance Point-to-Multi-Point coverage.

Product Specification

  • Item Code: TL-ANT5819MS
  • Frequency: 5.0 – 6.0 GHz
  • Impedance: 50Ω
  • Gain: 19dBi
  • VSWR(MAX.): 1.8 Max
  • HPOL Beamwidth: 120° (6dB) & 90° (3dB)
  • VPOL Beamwidth: 120° (6dB) & 90° (3dB)
  • Elevation Beamwidth:

CPE510 – 300Mbps 5Ghz 13dbi CPE

TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.

Product Specification

  • Item Code: CPE510
  • Wireless Speed: 5GHz 300Mbps/li>
  • Transmit Power: 23dBm
  • Antenna: 13dBi
  • MIMO: Yes
  • Coverage Range: 15km+
  • Compatibility: 802.11a/n

CPE Outdoor Access Point 2.4Ghz TL-WA7210N


Product Specification

  • Item Code: TL-WA7210N
  • Wireless Speed: 2.4GHz 150Mbps
  • Transmit Power: 27dBm
  • Antenna: 12dBi
  • Coverage Range: 5km+
  • Processor: 400MHz
  • Memory: 32MB DDR
  • Compatibility: 802.11b/g/n
  • External Antenna Interface: 1 * RP-SMA
  • Dual Ethernet Ports: Yes

Outdoor CPE – WIS-Q2300 2.4 Ghz 300Mbps

WIS-Q2300 is a 300Mbps Hi-Power outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary power boost technology in hardware design and 12dBi directional dual-polarized antenna, WIS-Q2300 is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions.

Product Features

  • Item Code: WIS-Q2300
  • Compliant with 802.11b/g/n/, speed up to 300Mbps
  • WiD TDMA greatly improves the network scalability in throughput and latency
  • Multi-operation modes support Gateway/WISP/Client/Access Point
  • 12dBi dual-polarized antenna to build long distance Wi-Fi connection
  • High output transmission power and reception sensitivity optimized
  • Passive POE(24VDC) for flexible deployment
  • Supports RSSI signal LEDs
  • WPA2/WPA/AES/TKIP and 802.1x authentication

Outdoor CPE – WIS-Q5300 5 Ghz 300Mbps

WIS-Q5300 is a 5GHz 300Mbps Hi-Power outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary power boost technology in hardware design and 16dBi directional dual-polarized antenna, WIS-Q5300 is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions

Product Features

  • Item Code: WIS-Q5300
  • Compliant with 802.11n/a, speed up to 300Mbps
  • WiD TDMA greatly improves the network scalability in throughput and latency
  • Multi-operation modes support Gateway/WISP/Client/Access Point
  • 16dBi dual-polarized antenna to build long distance Wi-Fi connection
  • High output transmission power and reception sensitivity optimized
  • Passive POE(24VDC) for flexible deployment
  • Supports RSSI signal LEDs

Base Station Radio 5Ghz 300Mbps

WIS-S5300 is a 2*2 MIMO Hi-Power outdoor wireless base station based on OFDM and TDMA modulation technology. It is flexible detachable antenna design with high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WiD TDMA technology, WIS-S5300 helps to get more clients accessed than legacy WiFi technology and greatly improve the network scalability in throughput and latency. The detachable antenna design would help it seamlessly work with Wisnetworks outdoor antennas.WIS-S5300 is best applied to rural wireless Internet, wireless hotspot and other industrial wireless solutions.

WiD TDMA greatly improves the network scalability in throughput and latency

  • Compliant with 802.11a/n, speed up to 300Mbps
  • Seamlessly work with Wisnetworks sector/dish/omni antenna
  • Gigabit LAN port helps get maximum wireless performance
  • High output transmission power and receive sensitivity optimized
  • Easy deployment and tilt adjustment with provided mounting kits
  • Passive POE(24VDC) for flexible deployment
  • Weatherproof design with water cover kit
  • Up to 16kV ESD protection

  • Item Code: WIS-S5300

Omni Base Station Dual-Band 1167 Mbps

WIS-S806AC is a robust outdoor dual-band wireless base station featuring 802.11ac technology for high end wireless coverage. Featuring 11ac technology, the WIS-S806AC is ideal for hotspot applications with dual-band simultaneous coverage.

Product Features:

  • Item Code: WIS-S806AC

Extremely Amazing Performance

The integrated 2*2 MIMO technology for 300Mbps 2.4GHz and 867Mbps 5GHz makes it 4x speed than legacy 802.11n standard. The tx power is boosted up to 30dBm for both 2.4GHz and 5GHz.

Up to 150 online concurrent clients

The high speed 720MHz Atheros CPU and 128MB DDR, the WIS-L713AC is capable for handling up 150 concurrent wireless client including CPE/ cellphone / pad / laptop. This makes the WIS-L713AC extremely applicable for WISP or hotspot location.

All-in-one base station

Integrating 6dBi dual-band omni antenna, WIS-S806AC is easy to provide long range outdoor coverage for all smart phone and laptops. The high durable temperature range and IP66 housing make it far more robust working in outdoor environment.


Sector Antenna 5Ghz 20dbi 120

WIS-L5819S is a 300Mbps 2*2 MIMO Hi-Power outdoor wireless base station based on 802.11a/n technology. It is industry die-cast IP67 design with high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WiD TDMA technology and 19dBi 120deg dual-polarized sector antenna, WIS-L5819S helps to get more clients accessed than legacy WiFi technology and greatly improve the network scalability in throughput and latency. WIS-L5819S is best applied to rural wireless Internet, wireless hotspot and other industrial wireless solutions.

Product Features:

  • Item Code: WIS-L5819S
  • WiD TDMA greatly improves the network scalability in throughput and latency
  • Compliant with 802.11a/n, speed up to 300Mbps
  • 18dBi dual-polarized antenna to expand coverage and enhance coverage densit
  • Gigabit LAN port helps get maximum wireless performance
  • High output transmission power and receive sensitivity optimized

Outdoor CPE – WIS-Q2300L 2.4 Ghz 300Mbps

WIS-Q2300L is a 300Mbps Hi-Gain outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to WISP network solutions. Featuring the Atheros 2*2 MIMO technology in hardware design and 12dBi directional dual-polarized antenna, WIS-Q2300L is specialized designed for rural Internet access, long distance wireless data transmission, wireless surveillance and other industrial wireless solutions.

Product Features:

  • Item Code: WIS-Q2300L
  • Compliant with 802.11b/g/n/, speed up to 300Mbps
  • WiD TDMA greatly improves the network scalability in throughput and latency
  • Multi-operation modes support Gateway/WISP/Client/Access Point
  • 12dBi dual-polarized antenna to build long distance Wi-Fi connection
  • Passive POE(24VDC) for flexible deployment
  • WPA2/WPA/AES/TKIP and 802.1x authentication
  • Transmit power selectable and distance control

Outdoor CPE – WIS-Q5300L 5 Ghz 300Mbps

WIS-Q5300L is a 5GHz 300Mbps 2×2 MIMO outdoor wireless CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WisOS technology in firmware design and 16dBi directional dual-polarized antenna, WIS-Q5300L is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions.

Product Features:

  • Compliant with 802.11n/a, speed up to 300Mbps
  • WiD TDMA greatly improves the network calability in throughput and latency
  • Multi-operation modes support Gateway/WISP/Client/Access Point/Repeater
  • 16dBi dual-polarized antenna to build long distance Wi-Fi connection
  • Passive POE(24VDC) for flexible deployment
  • Supports RSSI signal LEDs
  • WPA2/WPA/AES/TKIP and 802.1x authentication
  • Up to 4 Multiple SSID
  • Transmit power selectable and distance control

EnGenius – ENH1750EXT Outdoor Wireless Access Point

The ENH1750EXT supports greater user capacities in outdoor settings like marinas, campgrounds, and travel plazas with dual-band speed and performance to 1,300 Mbps on 5 GHz and 450 Mbps on the 2.4 GHz band. Band Steering shifts dual-band-capable clients to the less-congested 5 GHz band, optimizing bandwidth.

Product Specification:

  • Item Code: ENH1750EXT
  • RF: 2.4 and 5 GHz Frequency Bands
  • Standards: IEEE 802.11a/n/ac on 5 GHz; IEEE 802.11b/g/n on 2.4 GHz
  • Radio I: 11b/g/n: 2.412~2.484 GHz
  • Radio II11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
  • Data RateUp to 1300 Mbps on 5 GHz; Up to 450 Mbps on 2.4 GHz
  • Memory256MB
  • Flash Memory16MB
  • Power ConsumptionUp to 34W

ENS1750 Outdoor Wireless Access Point, Dual-Band AC1750

Extend your wireless coverage to the outdoors with the high-powered ENS1750, an 802.11a/b/g/n/ac 3×3 long-range Dual Band Wireless AC1750 Outdoor Access Point with speeds up to 450 Mbps on the 2.4 GHz and 1300 Mbps on the 5 GHz frequency bands that functions as a stand-alone Access Point or as part of an EnGenius Electron Series Solution of mix-and-match business-class networking products. Configurable in a number of operation modes, this robust outdoor Access Point can support a wide variety of applications, making it ideal for small-to-medium sized companies that wish to provide outdoor access to the company network for their employees or to provide network and/or Internet connectivity via a company’s existing broadband connection.

Product Specification:

    Hardware

  • Standard: IEEE 802.11a/b/g/n
  • Data Rate: Up to 450 Mbps on 2.4 GHz, up to 1300 Mbps on 5 GHz
  • Memory: 64MB
  • IEEEE 802.3at
  • Transmit Power

  • 2.4 GHz: 29 dBm
  • 5 GHz: 28 dBm
  • Maximum power is limited by regulatory power