Fiber


Optronix 1 GE ONU

Conform to IEEE802.3ah standard
Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services.
Support frame filtering and suppression
Support standard 802.1Q VLAN function, support VLAN conversion
Support 4094 VLANs (802.1Q)
Support Dynamic Bandwidth Allocation (DBA) function
Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc…

Product Specification:

  • Single ONU supports up to 8 LLID
  • Support IGMP Snooping

  • Support Ethernet port rate-limit loop detection

  • Support power failure alarm

  • Support lightning protection for power supply and lightning protection for service port

Optronix 8 PON OLT

GEPON–EX-1108 OLT 8PON Ports 1U – OLT provides 8GE (copper) and 8SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GEPON-EX-1108 OLT provides 8GE (copper) and 8SFP slots Combo interface for uplink, and 8 EPON ports for downstream. It can support 512 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1108
  • Interface: Eight Gigabit Combo ports, Eight optical ports
  • PON port: Eight 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Eight fixed PON slots with 1:64 splitting ratio at most

Optronix 4 PON OLT

GEPON–EX-1104 OLT 4PON Ports 1U – OLT provides 4GE (copper) and 4SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GEPON–EX1104 OLT provides 4GE (copper) and 4SFP slots Combo interface for uplink, and 4 EPON ports for downstream. It can support 256 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1104
  • Interface: Four Gigabit Combo ports, Four optical ports
  • PON port: Four 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Four fixed PON slots with 1:64 splitting ratio at most

Optronix 2 PON OLT

2PON OLT is the EPON OLT optical line terminal equipment. It can support 2 EPON PON ports and connect 128 ONU at most (by 1:64 splitter), and provides 2 uplink GE optic SFP slots and 2 uplink copper SFP slots.

GEPON-EX-1102 OLT provides 2GE (copper) and 2SFP slots Combo interface for uplink, and 2 EPON ports for downstream. It can support 128 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GEPON–EX-1102
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

16 PON OLT

GOPON – 16 OLT 16 PON Ports 1U – OLT provides 16 GE (copper) and 16 SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON-16OLT provides 16GE (copper) and 16SFP slots Combo interface for uplink, and 16 EPON ports for downstream. It can support 1024 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON–16OLT
  • Interface: Sixteen Gigabit Combo ports, Sixteen optical ports
  • PON port: Sixteen 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Sixteen fixed PON slots with 1:64 splitting ratio at most

8 PON OLT

GOPON – 8 OLT 8PON Ports 1U – OLT provides 8GE (copper) and 8SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON-8OLT provides 8GE (copper) and 8SFP slots Combo interface for uplink, and 8 EPON ports for downstream. It can support 512 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON–8OLT
  • Interface: Eight Gigabit Combo ports, Eight optical ports
  • PON port: Eight 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Eight fixed PON slots with 1:64 splitting ratio at most

4 PON OLT

GOPON – 4 OLT 4PON Ports 1U – OLT provides 4GE (copper) and 4SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON – 4OLT provides 4GE (copper) and 4SFP slots Combo interface for uplink, and 4 EPON ports for downstream. It can support 256 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON – 4OLT
  • Interface: Four Gigabit Combo ports, Four optical ports
  • PON port: Four 1G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Four fixed PON slots with 1:64 splitting ratio at most

2 PON OLT

GOPON – 2 OLT 2PON Ports 1U – OLT provides 2GE(copper)and 2SFP slots.

OLT series products is 1U high 19 inch rack mount product. The features of the OLTare small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high cost performance products.

GOPON – 2OLT provides 2GE(copper)and 2SFP slots Combo interface for uplink, and 2 EPON ports for downstream. It can support 128 ONU under 1:64 splitter ratio.

Product Specification:

  • Item Code: GOPON – 2OLT
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

2 PORT OLT – OP-EOLT-97042P

OP-EOLT 97042P is the GEPON OLT optical line terminal equipment. It can support 2 GEPON PON ports and connect 128 ONU at most (by 1:64 splitter), and provides 2 uplink GE optic SFP slots and 2 uplink copper SFP slots.

OP-EOLT 97042P built-in powerful switch modules, supporting full-duplex forwarding, powerful layer-2 protocols.

Product Specification:

  • Item Code: OP-EOLT_97042P
  • Interface: Two Gigabit Combo ports, two optical ports and two
  • PON port: Two 1.25G PON ports, SFP interface
  • Supply: 220VAC built-in Power Supply
  • Management Mode: Support SNMP, TELNET and CLI Management, Support EMS centralized management based on C-Data comprehensive network management platform.
  • Two fixed PON slots with 1:64 splitting ratio at most

SFP Transceiver – 40km 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 8/0KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 40K-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and PIN photo-detector
  • Up to 80km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation
  • Metal enclosure, for lower EMI

SFP Transceiver – 80Km 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 8/0KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 80S-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and PIN photo-detector
  • Up to 80km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation

SFP Transceiver – 1.25Gb/s CWDM Single-mode

Optilink’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector. The module data link up to 120KM in 9/125um single mode fiber.

Product Features:

  • Item Code: 125S-SFP
  • Up to 1.25Gb/s data links
  • DFB laser transmitter and APD Receiver
  • Up to 120km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation

SFP Transceiver – 155Mbps BIDI

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with SONET OC-3 and SDH STM-1.They are RoHS compliant and lead-free.

Product Features:

  • Item Code: BIDI155
  • Single LC receptacle optical interface compliant
  • Hot-pluggable SFP footprint
  • 1310nm FP laser transmitter
  • RoHS compliant and Lead Free
  • Up to 20 km on 9/125um SMF

Onu 1ge Port – Op-eonu 92001z Modems

OP-EONU 92001Z provides one 10/100/1000Mbps base-T interface, one optical interface. It is suitable for home and small business users. It can meet the FTTH high-speed data transmission of the application.

Product Specification:

  • Item Code: 92001Z
  • User interface : 1 10/100/1000M RJ45 port.
  • Transmission speed: upstream/downstream symmetrical 1Gbps
  • Network coverage radius: 20KM
  • Optical receive sensitivity: ≥-26dBm
  • Luminous power: 0dBm

24 Port Giga 4 Port SFP GbE L2 Managed Switch

S4600 is L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation etc), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. S4600 switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design feature, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users.

Product Features:

  • Item Code: DCN-S4600
  • Loop Detection
  • Broadcast Control
  • DHCP Server
  • VLAN
  • ACL
  • IGMP

Dual Fiber Media Converter – OL-4005 D 20

The10/100M auto-negotiation media converter can achieve the conversion between 10BASE-T or 100BASE-TX 100BASE-FX, extending the transmission distance of legal 10M Ethernet or 100M Fast Ethernet upto 100Km though Single mode optic fiber.

Product Specification:

  • Item Code: OL-4005-D
  • Standards: IEEE 802.3U,IEEE 802.1d
  • Wavelength: 1310nm
  • Power: External Power 5V Dc/1A, Internal 220V/1A
  • Environment: 0- 50 deg C
  • LED Indicator: Power, Link/ACT, Speed and FDX/Col, Link/ACT FDX
  • Dimension: 102mm x 74mm x 22mm(External Power supply)

OL-4005 G SFP/ OL-4050 G SFP

Gigabit media converter fulfills the conversion between 10/100/1000 BASE-T 1000 BASE-FX or vice versa, extending the transmission distance of Ethernet.

Product Specification:

  • Item Code: OL-4050_G_SFP
  • Power (Option): External Power 5V DC, Internal 220V-1A, Internal 48V DC
  • Environment: 0- 50 deg C
  • LED Indicator: Power, Link/ACT, Speed and FDX/Col, Link/ACT FDX
  • Certificates: CE FCC-Class A

Fiber Patch Cords

We supply fiber optic patch cord , fiber optic patch cable , LC,SC/APC,ST, E2000/APC,MU, VF45,FC, MT-RJ, SC, MPO, Volition,MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon,FDDI,RoHS compliant,LSZH,Riser,Plenum,OFNR,OFNP,simplex, duplex,single mode,9/125,SM, multimode,MM, 50/125, 62.5/125.


10G XFP Cable

10G XFP Cables were developed to provide 10Gb/s serial links for a wide range of applications including standards such as OC192/STM-64, G.709, and 10 Gigabit Ethernet, 10G Fibre Channel, and other industry standards. It is ideally suited for 10 GbE datacom (belly-to-belly for high density applications) and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards. Syrotech’s XFP Cables is a low cost XFP solution. XFP directly attached twinax cable assemblies are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. Transmitter and receiver are separate within a wide temperature range and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities. It is compliant to XFP MSA.


10G SFP Cable

10G SFP+ Cables offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet and service provider transport applications, such as switches, routers, media converters, and other data communication equipments. It is a popular industry format supported by many networks and switch vendors.


XENPAK Transceivers

Syrotech is a leading supplier of XENPAK transceivers. We have a large selection of XENPAK transceivers in stock and can ship the XENPAK transceivers to you within 24 hours. All of our XENPAK transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the XENPAK transceivers to work in your system and all of our XENPAK transceivers come with a lifetime advance replacement warranty.


XFP Transceivers

Syrotech is a leading supplier of XFP transceivers. We have a large selection of XFP transceivers in stock and can ship the XFP transceivers to you within 24 hours. All of our XFP transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the XFP transceivers to work in your system and all of our XFP transceivers come with a lifetime advance replacement warranty.


X2 Transceiver

Syrotech is a leading supplier of X2 transceivers. We have a large selection of X2 transceivers in stock and can ship the X2 transceivers to you within 24 hours. All of our X2 transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the X2 transceivers to work in your system and all of our X2 transceivers come with a lifetime advance replacement warranty.


GBIC Transceivers

Syrotech is a leading supplier of GBIC transceivers. We have a large selection of GBIC transceivers in stock and can ship the GBIC transceivers to you within 24 hours. All of our GBIC transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the GBIC transceivers to work in your system and all of our GBIC transceivers come with a lifetime advance replacement warranty..


SFP Modules – Transceiver

Syrotech is a leading supplier of SFP transceivers. We have a large selection of SFP transceivers in stock and can ship the SFP transceivers to you within 24 hours. All of our SFP transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the SFP transceivers to work in your system and all of our SFP transceivers come with a lifetime advance replacement warranty.


Fiber Media Converter – Dual

GOMC-1303-20 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 20km on dual fiber optic.

10/100Mbps auto-sensed, easily upgrade

Product Features

  • Item Code: GOMC-1303-20
  • Full-duplex and half-duplex auto-sensed
  • MDI/MDI-X Auto Negotiation
  • 10/100Mbps store-and-forward
  • 100Mbps cut-through transmission
  • Packet size up to1518bytes
  • Supporting VLAN / VoIP /QoS packets

Fiber Media Converter – Single

GOMC-BI3503-20/5303-20 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 20km single fiber optic cable.

Product Features

  • Item Code: GOMC-BI3503-20/5303-20
  • Full-duplex and half-duplex auto-sensed
  • MDI/MDI-X Auto Negotiation
  • 10/100Mbps store-and-forward
  • 100Mbps cut-through transmission
  • Packet size up to1518bytes
  • Supporting VLAN / VoIP /QoS packets

Media Converter -MC-SMSF-G20

Product Specification:

  • Standard: IEEE802.3 10BASE-T Ethernet IEEE802.3u 100BASE-TX/FX Fast-Ethernet IEEE802.3z/ab 1000BASE-FX/TX 1000M-Ethernet IEEE802.3x
  • RJ-45 Port: Auto-MDI/MDIX
  • Fiber Port Wavelength Send-Power: SC/ST/FC 1310/1550nm 1310/1490/1550nm SMF: -20 dBm (min.) 0 dBm (max.)
  • Network Cable: 10BASE-T: Category 3,4 or 5 UTP/STP (Max:100m) EIA/TIA- 568 100 Ω STP (Max:100m) 100BASE-TX: 2pairs of category 5 UTP (Max:100m) EIA/TIA- 568 100 Ω STP (Max:100m) 1000BASE-FX: SMF:8.3/125,8.7/125,9/125,10/125μm (20~120km)
  • Dimensions(WxDxH): 94x71x27mm