Wireless

24 Port Giga 4 Port SFP GbE L2 Managed Switch

This entry was posted in Optilink Switch WIFI Wireless

S4600 is L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation etc), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. S4600 switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design feature, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users.

Product Features:

Item Code: DCN-S4600
Loop Detection
Broadcast Control
DHCP Server
VLAN
ACL
IGMP

Radwin 5000 Jet Series Beam Forming Antenna

This entry was posted in RADWIN Wireless

RADWIN 5000 JET is a disruptive point-to-multipoint solution incorporating a smart beamforming antenna and advanced air interface. JET’s antenna beam cancels radio interference and enables operation in heavily congested unlicensed bands and in non-line-of-sight (NLOS) conditions, delivering the highest actual capacity for longer range than any other point-to-multipoint system in the industry.

Product Features

Item Code: RADWIN 5000 JET
Base station with smart beamforming antenna
Variety of subscriber units – 10, 25, 50 Mbps upgradable to 100 Mbps
Up to 250 Mbps per sector, 1 Gbps per cell using 2 x 40MHz
Long range – 40 Km / 25 miles
Interference cancellation due to directional narrow beam antenna
Guaranteed SLA per subscriber unit

Radwin 2000 D Series Radios Deliver

This entry was posted in RADWIN Wireless

RADWIN 2000 D+ Series radios deliver up to 750 Mbps throughout, making them the ideal backhaul solution where fiber is unavailable or cost-prohibitive.

Product Features

Item Code: Radwin 2000 D
Net throughput: 750 Mbps
Frequency availability: 5.1 – 6.0 GHz
Smart Dynamic Channel Bandwidth Selection feature: 20/40/80 MHz
Advanced and proven air interface
Seamless operation in NLOS and severe multipath conditions
Radio frame synchronization enabling co-located radio deployments

Radwin 2000 A Series Radios Deliver

This entry was posted in RADWIN Wireless

RADWIN 2000 A Series radios deliver up to 50 Mbps net throughput and support up to 8 E1s/T1s. The series is available in 3 models: 10, 25, 50Mbps, supporting 2, 4, 8 E1s/T1s respectively. The series is upgradable to 100 Mbps.

RADWIN 2000 A series radios are ideal for carrier access applications that require SLAs and for private networks seeking a carrier-class solution.

Product Features

Item Code: Radwin 2000 A
Up to 10 or 25 or 50 Mbps net throughput, upgradable to 100 Mbps
Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
Small form factor for city deployments
Asymmetric capacity; fixed or dynamic channel allocation
Connectorized or integrated antenna unit

Radwin 2000 B Series

This entry was posted in RADWIN Wireless

RADWIN 2000 B Series radios deliver up to 50 Mbps and up to 8 E1s/T1s, and the radios are upgradable to 100 Mbps and 200 Mbps. Delivering IP and TDM over the same link enables customers to benefit from seamless migration from legacy TDM to all-IP networks.

Product Features

Item Code: Radwin 2000 B
Up to 50 Mbps net throughput, upgradable for up to 200 Mbps
Native TDM (up to 8 E1s/T1s) + Ethernet over the same link
Integrated high gain antenna or connectorized unit with an embedded antenna
Asymmetric capacity; fixed or dynamic channel allocation
Single radio supporting 2.2-2.4 or 4.9-6.0 or 5.9-6.4 GHz
QoS and VLAN capabilities

Radwin 2000 C Series

This entry was posted in RADWIN Wireless

Reaching 200 Mbps net throughput and providing IP and TDM over the same link make these radios ideal for today’s and tomorrow’s networks, enabling seamless migration from legacy TDM to all-IP networks such as LTE/4G.

RADWIN 2000 C Series radios operate in both symmetric and adaptive asymmetric mode – whereby capacity is dynamically allocated between the uplink and the downlink based on traffic loads and air-interface conditions. Extremely simple to install and maintain, systems operate flawlessly in the most challenging environments, including non-line-of-sight scenarios, interference-ridden environments and extreme temperatures.

Product Features

Item Code: Radwin 2000 C
Up to 200 Mbps net throughput
Native TDM (up to 16 E1s/T1s) + Ethernet over the same link
Long range – up to 120 Km/75 miles
Single radio supporting 2.2-2.4 or 3.3-3.8/3.65 or 4.4-5 or 4.9-6 or 5.9-6.4 GHz
QoS and VLAN capabilities
Asymmetric capacity – fixed or dynamic channel allocation
Low latency < 3msec
Connectorized or integrated antenna units

Panel Antenna 5Ghz 23dbi Outdoor

This entry was posted in Antenna TP Link Wireless

The TL-ANT5823B 5GHz 23dBi outdoor panel antenna is ideal for outdoor use by attaching to your wireless access points/routers which operate on less crowded 5GHz band, It could be used for long distance point-to-point connection, providing your stable wireless links. It is very easy to use, no configuration or software installation required.

Product Specification

Item Code: TL-ANT5823B
Frequency: 5.15~5.85GHz
Impedance: 50 Ohms
Gain: 23dBi
VSWR(MAX.): ≤1.5
HPOL Beamwidth: 12
VPOL Beamwidth: 12
Polarization: Vertical or Horizontal

Wireless CPE 300Mbps 5Ghz – WBS510

This entry was posted in Radio TP Link Wireless

TP-LINK’s 5GHz 300Mbps Outdoor Wireless Base Station is specifically designed to provide an effective solution for outdoor wireless networking applications. With its centralized management platform and high degree of flexibility, it is the ideal choice for providing point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage. The TP-LINK Outdoor Wireless Base Station pairs professional performance with user-friendly design, making it the perfect solution for both business and home users.

Product Specification

Item Code: WBS510
Compatibility: 802.11 a/n
Wireless Speed: 300Mbps
Transmit Power: 27dBm
Maximum Transfer distance: 50+km
MIMO: Yes
Weatherproof Enclosure: IP65
ESD Protection: 15kV

Sector Antenna 19DBI – TL-ANT5819MS

This entry was posted in Antenna TP Link Wireless

The Pharos Sector Antenna features 2×2 MIMO technology, is suitable for outdoor use, and is ideally paired with a Pharos Base Station. These antennas feature high-gain directional transmission and represent an excellent solution for providing long distance Point-to-Multi-Point coverage.

Product Specification

Item Code: TL-ANT5819MS
Frequency: 5.0 – 6.0 GHz
Impedance: 50Ω
Gain: 19dBi
VSWR(MAX.): 1.8 Max
HPOL Beamwidth: 120° (6dB) & 90° (3dB)
VPOL Beamwidth: 120° (6dB) & 90° (3dB)
Elevation Beamwidth: 4°

CPE510 – 300Mbps 5Ghz 13dbi CPE

This entry was posted in TP Link Wireless

TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.

Product Specification

Item Code: CPE510
Wireless Speed: 5GHz 300Mbps/li>
Transmit Power: 23dBm
Antenna: 13dBi
MIMO: Yes
Coverage Range: 15km+
Compatibility: 802.11a/n

5GHz 150Mbps Outdoor CPE – TL-WA7510N

This entry was posted in TP Link Wireless

Product Specification

Item Code: TL-WA7510N
Wireless Speed: 5GHz 150Mbps/li>
Transmit Power: 27dBm
Antenna: 15dBi
Coverage Range: 5km+
Processor: 400MHz
Memory: 32MB DDR

CPE Outdoor Access Point 2.4Ghz TL-WA7210N

This entry was posted in TP Link Wireless

Product Specification

Item Code: TL-WA7210N
Wireless Speed: 2.4GHz 150Mbps
Transmit Power: 27dBm
Antenna: 12dBi
Coverage Range: 5km+
Processor: 400MHz
Memory: 32MB DDR
Compatibility: 802.11b/g/n
External Antenna Interface: 1 * RP-SMA
Dual Ethernet Ports: Yes

Outdoor CPE – WIS-Q2300 2.4 Ghz 300Mbps

This entry was posted in Wireless Wis

WIS-Q2300 is a 300Mbps Hi-Power outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary power boost technology in hardware design and 12dBi directional dual-polarized antenna, WIS-Q2300 is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions.

Product Features

Item Code: WIS-Q2300
Compliant with 802.11b/g/n/, speed up to 300Mbps
WiD TDMA greatly improves the network scalability in throughput and latency
Multi-operation modes support Gateway/WISP/Client/Access Point
12dBi dual-polarized antenna to build long distance Wi-Fi connection
High output transmission power and reception sensitivity optimized
Passive POE(24VDC) for flexible deployment
Supports RSSI signal LEDs
WPA2/WPA/AES/TKIP and 802.1x authentication

Outdoor CPE – WIS-Q5300 5 Ghz 300Mbps

This entry was posted in Wireless Wis

WIS-Q5300 is a 5GHz 300Mbps Hi-Power outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary power boost technology in hardware design and 16dBi directional dual-polarized antenna, WIS-Q5300 is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions

Product Features

Item Code: WIS-Q5300
Compliant with 802.11n/a, speed up to 300Mbps
WiD TDMA greatly improves the network scalability in throughput and latency
Multi-operation modes support Gateway/WISP/Client/Access Point
16dBi dual-polarized antenna to build long distance Wi-Fi connection
High output transmission power and reception sensitivity optimized
Passive POE(24VDC) for flexible deployment
Supports RSSI signal LEDs

Base Station Radio 5Ghz 300Mbps

This entry was posted in Wireless Wis

WIS-S5300 is a 2*2 MIMO Hi-Power outdoor wireless base station based on OFDM and TDMA modulation technology. It is flexible detachable antenna design with high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WiD TDMA technology, WIS-S5300 helps to get more clients accessed than legacy WiFi technology and greatly improve the network scalability in throughput and latency. The detachable antenna design would help it seamlessly work with Wisnetworks outdoor antennas.WIS-S5300 is best applied to rural wireless Internet, wireless hotspot and other industrial wireless solutions.

WiD TDMA greatly improves the network scalability in throughput and latency

Compliant with 802.11a/n, speed up to 300Mbps
Seamlessly work with Wisnetworks sector/dish/omni antenna
Gigabit LAN port helps get maximum wireless performance
High output transmission power and receive sensitivity optimized
Easy deployment and tilt adjustment with provided mounting kits
Passive POE(24VDC) for flexible deployment
Weatherproof design with water cover kit
Up to 16kV ESD protection

Item Code: WIS-S5300

Omni Base Station Dual-Band 1167 Mbps

This entry was posted in Antenna Wireless Wis

WIS-S806AC is a robust outdoor dual-band wireless base station featuring 802.11ac technology for high end wireless coverage. Featuring 11ac technology, the WIS-S806AC is ideal for hotspot applications with dual-band simultaneous coverage.

Product Features:

Item Code: WIS-S806AC

Extremely Amazing Performance

The integrated 2*2 MIMO technology for 300Mbps 2.4GHz and 867Mbps 5GHz makes it 4x speed than legacy 802.11n standard. The tx power is boosted up to 30dBm for both 2.4GHz and 5GHz.

Up to 150 online concurrent clients

The high speed 720MHz Atheros CPU and 128MB DDR, the WIS-L713AC is capable for handling up 150 concurrent wireless client including CPE/ cellphone / pad / laptop. This makes the WIS-L713AC extremely applicable for WISP or hotspot location.

All-in-one base station

Integrating 6dBi dual-band omni antenna, WIS-S806AC is easy to provide long range outdoor coverage for all smart phone and laptops. The high durable temperature range and IP66 housing make it far more robust working in outdoor environment.

Sector Antenna 5Ghz 20dbi 120

This entry was posted in Antenna Wireless Wis

WIS-L5819S is a 300Mbps 2*2 MIMO Hi-Power outdoor wireless base station based on 802.11a/n technology. It is industry die-cast IP67 design with high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WiD TDMA technology and 19dBi 120deg dual-polarized sector antenna, WIS-L5819S helps to get more clients accessed than legacy WiFi technology and greatly improve the network scalability in throughput and latency. WIS-L5819S is best applied to rural wireless Internet, wireless hotspot and other industrial wireless solutions.

Product Features:

Item Code: WIS-L5819S
WiD TDMA greatly improves the network scalability in throughput and latency
Compliant with 802.11a/n, speed up to 300Mbps
18dBi dual-polarized antenna to expand coverage and enhance coverage densit
Gigabit LAN port helps get maximum wireless performance
High output transmission power and receive sensitivity optimized

Outdoor CPE – WIS-Q2300L 2.4 Ghz 300Mbps

This entry was posted in Wireless Wis

WIS-Q2300L is a 300Mbps Hi-Gain outdoor wireless access point and CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to WISP network solutions. Featuring the Atheros 2*2 MIMO technology in hardware design and 12dBi directional dual-polarized antenna, WIS-Q2300L is specialized designed for rural Internet access, long distance wireless data transmission, wireless surveillance and other industrial wireless solutions.

Product Features:

Item Code: WIS-Q2300L
Compliant with 802.11b/g/n/, speed up to 300Mbps
WiD TDMA greatly improves the network scalability in throughput and latency
Multi-operation modes support Gateway/WISP/Client/Access Point
12dBi dual-polarized antenna to build long distance Wi-Fi connection
Passive POE(24VDC) for flexible deployment
WPA2/WPA/AES/TKIP and 802.1x authentication
Transmit power selectable and distance control

Outdoor CPE – WIS-Q5300L 5 Ghz 300Mbps

This entry was posted in Wireless Wis

WIS-Q5300L is a 5GHz 300Mbps 2×2 MIMO outdoor wireless CPE based on 802.11b/g/n technology. It is high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WisOS technology in firmware design and 16dBi directional dual-polarized antenna, WIS-Q5300L is specialized designed for rural Internet access, long distance wireless data transmission, wireless coverage extension and other industrial wireless solutions.

Product Features:

Compliant with 802.11n/a, speed up to 300Mbps
WiD TDMA greatly improves the network calability in throughput and latency
Multi-operation modes support Gateway/WISP/Client/Access Point/Repeater
16dBi dual-polarized antenna to build long distance Wi-Fi connection
Passive POE(24VDC) for flexible deployment
Supports RSSI signal LEDs
WPA2/WPA/AES/TKIP and 802.1x authentication
Up to 4 Multiple SSID
Transmit power selectable and distance control

EnGenius – ENH1750EXT Outdoor Wireless Access Point

This entry was posted in EnGenius Wireless

The ENH1750EXT supports greater user capacities in outdoor settings like marinas, campgrounds, and travel plazas with dual-band speed and performance to 1,300 Mbps on 5 GHz and 450 Mbps on the 2.4 GHz band. Band Steering shifts dual-band-capable clients to the less-congested 5 GHz band, optimizing bandwidth.

Product Specification:

Item Code: ENH1750EXT
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz; IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data RateUp to 1300 Mbps on 5 GHz; Up to 450 Mbps on 2.4 GHz
Memory256MB
Flash Memory16MB
Power ConsumptionUp to 34W

ENS1750 Outdoor Wireless Access Point, Dual-Band AC1750

This entry was posted in EnGenius Wireless

Extend your wireless coverage to the outdoors with the high-powered ENS1750, an 802.11a/b/g/n/ac 3×3 long-range Dual Band Wireless AC1750 Outdoor Access Point with speeds up to 450 Mbps on the 2.4 GHz and 1300 Mbps on the 5 GHz frequency bands that functions as a stand-alone Access Point or as part of an EnGenius Electron Series Solution of mix-and-match business-class networking products. Configurable in a number of operation modes, this robust outdoor Access Point can support a wide variety of applications, making it ideal for small-to-medium sized companies that wish to provide outdoor access to the company network for their employees or to provide network and/or Internet connectivity via a company’s existing broadband connection.

Product Specification:

Hardware

Standard: IEEE 802.11a/b/g/n
Data Rate: Up to 450 Mbps on 2.4 GHz, up to 1300 Mbps on 5 GHz
Memory: 64MB
IEEEE 802.3at

Transmit Power

2.4 GHz: 29 dBm
5 GHz: 28 dBm

Maximum power is limited by regulatory power

Cambium PTP 820

This entry was posted in Cambium Wireless

PTP 820 is a point-to-point licensed microwave backhaul platform that integrates leading networking functionality with the industry’s most advanced microwave technologies creating a superior transport solution.

PTP 820 supports all types of networks requiring hybrid or all-IP traffic utilizing three different enclosures:

PTP 820S – All-Outdoor unit
PTP 820C – All-Outdoor / Multi-Core
PTP 820G – Split-Mount / All-Indoor, Multi-Carrier Options

Product Specification:

Item Code: Cambium PTP 820
Licensed frequency bands 6-42GHz
Up to 2048 QAM, with 11-step hitless and errorless Adaptive
Coding & Modulation (ACM) for high reliability
Up to 80 MHz bandwidth supported
Multi-gigabits radio capacity with high spectral efficiency
Integrated synchronization solution: SyncE/IEEE 1588v2

Cambium PTP 650S

This entry was posted in Cambium Wireless

Sub-6 GHz Backhaul Designed For Small Cell Networks

Network operator shave experienced massive growth in data, voice, and video traffic over the past few years. This growth has imposed new requirements for high bandwidth and secure, reliable connectivity in areas not previously covered. Heterogeneous networks of small cells are increasingly being deployed in traffic “hotspot” areas to address these increasing capacity demands. In addition, data “not spots” are being addressed in suburban and rural areas with lower capacity small cell deployments.

Product Specification:

Item Code: Cambium PTP 650s
4.9 GHz to 6.05 GHz
2.5 – 2.6 GHz in a future release
3.3 – 3.6 GHz in a future release
Capacity: up to 450 Mbps
Latency: 1 – 3 ms
Flexible channel width: 5, 10, 15, 20, 30, 40, and 45 MHz channels
Modulation: 256 QAM

Cambium PTP 650

This entry was posted in Cambium Wireless

Reliable, High-Capability Point-to-Point Wireless Broadband Designed For Your Multi-Service Network

Service providers, government public safety agencies, and critical infrastructure operators such as utilities and energy companies need to meet the massive growth in demand for data, voice and video traffic. Providing high throughput in limited spectrum is the challenge.

Product Features:

Item Code: Cambium PTP 650
Frequency availability: 4.9 GHz to 6.05 GHz
Capacity: up to 450 Mbps
Latency: 1 – 3 ms
Flexible channel width: 5, 10, 15, 20, 30, 40, and 45 MHz channels
Modulation: 256 QAM

Cambium PTP 600

This entry was posted in Cambium Wireless

With carrier-grade reliability, PTP 600 links have class-leading sensitivity and power output that enable links to go farther while sustaining high throughput regardless of conditions. With data rates up to 300 Mbps and reaching distances up to 124 miles, this Series of high-performance and secure wireless bridges makes cost-effective connectivity and backhaul a reality for a wide range of enterprises, service providers, utilities, transportation agencies, and public safety organizations.

PTP 600 is available in the following frequencies:

Licensed solutions for the 2.5, 4.5, 4.8, and 4.9 GHz bands, which are dedicated to the license holders for
- Educational Broadcast Service
- NATO/Federal agencies
- Public Safety
Unlicensed solutions in the 5.4, 5.8, and 5.9 GHz spectrum.

Cambium PTP 500

This entry was posted in Cambium Wireless

Affordable Wireless Connectivity and Backhaul For Virtually All Path Conditions

Choose the PTP 500 Series to deliver high-speed, robust wireless backhaul. Connect buildings in a campus setting. Extend video surveillance beyond the wired infrastructure. Support bandwidth-intensive applications such as Voice-over-IP, telemedicine, IP gaming, and multimedia. The PTP 500 bridges can deliver up to 99.999% availability in virtually any environment, including Non-Line-of-Sight (NLoS), long-distance Line-of-Sight (LoS), over water or open terrain, even through extreme weather conditions.

Product Features:

Item Code: PTP 500
Frequency availability: 3.5 GHz, 3.65 GHz, and 5470 – 5875 MHz
All units ship with a 25 Mbps base system.
Single step license upgrades are available from 25 to 52 Mbps or 25 to 105 Mbps.
Stepped upgrades are available for 25 to 52 Mbps and 52 to 105 Mbps.
Supports 5, 10, and 15 MHz channel sizes.
A single T1/E1 port capability enabled through the PTP Power Indoor Unit (PIDU Plus) via simple splitter or Y cable
Extends Intelligent DFS (i-DFS) to regions where radar detection is enabled.

Cambium PTP 450

This entry was posted in Cambium Wireless

Optimized For Reach, Reliability and Throughput

The New PTP 450i backhaul has dynamic interference filtering, improved transmit power, and better receive sensitivity in the 4900-5925 MHz spectrum. The rugged IP-66/67 enclosure has a multifunction AUX port and integrated or connectorized design for maximum flexibility.

Product Features:

Item Code: PTP 450
Frequency availability: 3.5 GHz, 3.65 GHz, and 5470 – 5875 MHz
Capacity: up to 125 Mbps
Latency: 3 – 5 ms
Flexible channel width: 5, 10 and 20 MHz
Modulation: 256 QAM
Smart Antenna Technology: OFDM 2×2 MIMO A B

Cambium PMP 430

This entry was posted in Cambium Wireless

Higher Throughput With Low Latency and GPS Synchronization

Extend broadband services for high-speed Internet access, voice over IP, video surveillance, and SCADA with 200 Mbps of useable throughput per tower at a cost much lower than wired alternatives. The Canopy wireless broadband access 430 Series system enables services providers to extend DSL, fiber, or cable networks to underserved rural areas. For industrial applications, network operators can rapidly connect an entire campus and remote office locations. Government Network Operators can establish cost-effective links for public safety, public service, and public access. Canopy wireless broadband access networks provide last-mile network extensions that provide carrier-grade connectivity. Proven in thousands of networks around the world, the Canopy system provides consistent and reliable performance that can be rapidly deployed to meet connectivity requirements.

Product Features:

Item Code: PMP430
Low complexity for ease of installation and rapid deployment
Low maintenance infrastructure to minimize operational costs
Scalable from small to region wide connectivity deployments
Line-of-Sight (LOS) and near-Line-of-Sight (nLOS) performance
Consistent throughput
Low latency
Supports video, data, VoIP, and SCADA applications

Cambium PTP 200

This entry was posted in Cambium Wireless

Establish and Extend Backhaul Communications Affordably
Designed to securely transport data, voice, and video in both near Line-of-Sight (nLOS) and Line-of-Sight (LOS) environments, the PTP 200 Series offers affordable, accelerated throughput at a time when operators are challenged with increasing bandwidth capacities to support additional applications, subscribers, and users. With solutions including a dual-band radio with outstanding small packet performance, a 5 GHz solution with exceptional long distance capabilities, and a 4.9 GHz system for public safety, the PTP 200 Series provides many options for budget-restricted operators while meeting their unique requirements for longer range, more bandwidth, and band-specific utilization. Their ruggedness, field durability, and MTBF are recognized throughout the industry and contribute to their exceptional performance. Their low cost of ownership makes a PTP 200 solution affordable for even the most restricted budgets.

Product Applications:

Leased Line Replacement
Building to Building and Remote Locations
Voice and Video Backhaul
Video Surveillance

Cambium PMP 100

This entry was posted in Cambium Wireless

Extend broadband services for high speed Internet access, voice over IP, video surveillance, and SCADA at a cost much lower than wired alternatives. The Canopy wireless broadband access system enables services providers to extend DSL, fiber, or cable networks to underserved rural areas. For industrial applications, network operators can rapidly connect an entire campus and remote office locations. Government Network Operators can establish cost-effective links for public safety, public service, and public access. Canopy wireless broadband access networks provide last-mile network extensions that provide carrier-grade connectivity. Proven in thousands of networks around the world, the Canopy system provides consistent and reliable performance that can be rapidly deployed to meet connectivity requirements.

Product Specification:

Item Code: Cambium PMP 100

2.4, 5.1, 5.2, 5.4, 5.8 and 6.0 GHz bands

Up to 14 Mbps Ethernet data rate

Range: 14 Mbps to 1 mile LOS | 7 Mbps to 2 miles LOS

Robust security: unique scrambling | optional 128/256-bit AES

Small footprint

Easy to deploy and use

Cambium PTP 100

This entry was posted in Cambium Wireless

This series of bridges make use of Cambium’s proprietary Point-to-Multipoint Wireless Broadband platform modulation scheme to deliver broadband connectivity across distances of up to 35 miles (56 kilometers). The PTP 100 Series is available in a broad range of frequencies (2.4, 5.1, 5.2, 5.4, and 5.8 GHz) and is uniquely suited for delivering consistent throughput in Line-of-Sight (LoS) configurations.

Product Specification:

Item Code: Cambium PTP 100

Frequency Band: 5.725 GHz – 5.875 GHz

Frequency: 5.7GHz

Ethernet Capacity: 2Mbps to 14Mbps

Radio Type: IP

Description: PTP 100 5.7 GHz 20 Mbps Backhaul Kit – no Reflector

System Configuration: All-Outdoor

Modulation: FSK

Temperature Range: -40° to +131° F (-40° to +55° C)

Zoneflex Wireless Access Point

This entry was posted in Ruckus Wireless

Building upon the successful experience with 50,000 customers relying on our Wi-Fi solutions to power their networks with industry leading innovations such as BeamFlex+, Ruckus is raising the bar again with future-ready networks.

The new 710 delivers the highest performance Smart Wi-Fi access point, increased device density, and Wi-Fi monetization with Internet of Things (IoT) technologies enabling new business models for enterprises and service providers.

Product Specification:

Item Code: ZONEFLEX R710

Description: High-end 802.11ac Wave 2 AP with MU-MIMO and BeamFlex+

Maximum PHY rate: 1,733 Mbps (5GHz), 800 Mbps (2.4GHz)

Wi-Fi technology: 802.11ac Wave 2 (5GHz), 802.11n (2.4GHz)

Concurrent users: 512

Radio chains:streams: 4×4:4

BeamFlex gains: 6dB

Zoneflex 7982 Indoor Access Point

This entry was posted in Ruckus Wireless

High Capacity, High performance, Three-stream Wi-Fi Access Point
For enterprises and carriers requiring increased wireless performance, capacity, unparalleled ease of use and greater business value, particularly within high-density environments, the ZoneFlex 7982 is one of the most reliable and highest performing product in the industry. The ZoneFlex 7982 delivers consistent performance and maintains stable connections within high-capacity environments and to smart mobile devices that constantly change their location and orientation. The simple variation of a device’s orientation can account for up to a 5x performance degradation among Wi-Fi products unable to adapt to such changes. To address these challenges, the ZoneFlex 7982 is the only three-stream 802.11n access point to combine dynamic polarization diversity with adaptive antenna arrays and transmit beamforming to give customers up to a 4x improvement in Wi-Fi performance, signal gain and reception.

Zoneflex R600 Indoor Access Point

This entry was posted in Ruckus Wireless

The Ruckus ZoneFlex R600 delivers high-performance and reliable 802.11ac wireless networking at a competitive price point for medium density venues such as in K-12 or education.

The ZoneFlex R600 combines patented adaptive antenna technology and automatic interference mitigation to deliver consistent, predictable performance at extended ranges with up to an additional 6dB of BeamFlex gain on top of the physical antenna gain and up to 15dB of interference mitigation.

Product Specification:

Item Code: ZONEFLEX R600
Description: Mid-range 802.11ac AP with BeamFlex+
Maximum PHY rate: 1,300 Mbps (5GHz), 450 Mbps (2.4GHz)
Wi-Fi technology: 802.11ac (5GHz), 802.11n (2.4GHz)
Concurrent users: 512
Radio chains:streams: 3×3:3
BeamFlex gains: 6dB

Zoneflex R700 Indoor Access Point

This entry was posted in Ruckus Wireless

The ZoneFlex R700 ensures the most reliable connectivity within challenging and ever-changing RF environments. With BeamFlex+, the ZoneFlex R700 is capable of delivering 6 dB of signal-to-interference-plus-noise (SINR) improvement and up to 15 dB of interference mitigation over other APs. The ZoneFlex R700 simultaneously supports spatial multiplexing and BeamFlex+ to deliver the best price/performance of any three-stream 802.11ac AP.

Product Specification:

Item Code: ZONEFLEX R700
Description: High-end 802.11ac AP with BeamFlex+
Maximum PHY rate: 1,300 Mbps (5GHz), 450 Mbps (2.4GHz)
Wi-Fi technology: 802.11ac (5GHz), 802.11n (2.4GHz)
Concurrent users: 512
Radio chains:streams: 3×3:3
BeamFlex gains: 6dB
Max. interference mitigation: 15dB
PD-MRC: Yes

Zoneflex R500 Indoor Access Point

This entry was posted in Ruckus Wireless

The Ruckus ZoneFlex R500 delivers high-performance and reliable 802.11ac wireless networking at a competitive price point.

Unlike any other 802.11ac wireless solution in its class, the ZoneFlex R500 combines patented adaptive antenna technology and automatic interference mitigation to deliver consistent, predictable performance at extended ranges with up to an additional 4dB of BeamFlex gain on top of the physical antenna gain and up to 10dB of interference mitigation.

Product Specification:

Item Code: ZONEFLEX R500
Description: Mid-range 802.11ac AP with BeamFlex+
Maximum PHY rate: 867 Mbps (5GHz),300 Mbps (2.4GHz)
Wi-Fi technology: 802.11ac (5GHz), 802.11n (2.4GHz)
Concurrent users: 512
Radio chains:streams: 2×2:2
BeamFlex gains: 4dB
Max. interference mitigation: 10dB
PD-MRC: Yes

Air Setu-M2

This entry was posted in Air Pro Radio Wireless

Product Specification:

Chipset: Atheros 9341
Wireless: 802.11N, 2T2R 300M MIMO Technology
Memory: 64MB DDR2 RAM (128MB available by extra cost)
Flash: 8MB(16MB available by extra cost)
Interface: 1 10/100 Mbps RJ45 Port, support 12~24V PoE, 1 Reset Button
Antenna: N Type Antenna connector

APOES-1216 POE Switch

This entry was posted in Air Pro Switch Wireless

Product Specification:

Chipset: RTL8316D
Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3at, IEEE802.3af
Network Media (Cable): 10BASE-T: UTP category 5 cable (maximum 100m) 100BASE-T: UTP category 5,5e cable (maximum 100m)
Number of Ports: 16 x 10/100Mbps Auto-Negotiation ports
LED indicators: Link/Act, POE, Power
Transfer Method: Store-and-Forward

Media Converter -MC-SMSF-G20

This entry was posted in Air Pro Media Converter Wireless

Product Specification:

Standard: IEEE802.3 10BASE-T Ethernet IEEE802.3u 100BASE-TX/FX Fast-Ethernet IEEE802.3z/ab 1000BASE-FX/TX 1000M-Ethernet IEEE802.3x
RJ-45 Port: Auto-MDI/MDIX
Fiber Port Wavelength Send-Power: SC/ST/FC 1310/1550nm 1310/1490/1550nm SMF: -20 dBm (min.) 0 dBm (max.)
Network Cable: 10BASE-T: Category 3,4 or 5 UTP/STP (Max:100m) EIA/TIA- 568 100 Ω STP (Max:100m) 100BASE-TX: 2pairs of category 5 UTP (Max:100m) EIA/TIA- 568 100 Ω STP (Max:100m) 1000BASE-FX: SMF:8.3/125,8.7/125,9/125,10/125μm (20~120km)
Dimensions(WxDxH): 94x71x27mm

Air Namo2 Omni – 2.4GHz – 300Mbps

This entry was posted in Air Pro Wireless

Product Specification:

Item Code: airnamo2
Chipset: MT7620A 580MHZ
Wireless: 802.11N, 2T2R 300M MIMO Technology
Memory: 256MB DDR2 RAM
Flash: 16MB
Interface: 2 10/100 Mbps RJ45 Port, support 12~24V PoE, 1 Reset Button, 1 DC Jack, 12V Power Supply

Air Bheem 2322 – 5 Ghz – 300 Mbps

This entry was posted in Air Pro Wireless

Product Specification:

Item Code: airbheem2322
High Power 300Mbps AP/Client
15dbi Panelantenna
WPA/WPA2 encryptions for defence against security threats
Seamlessly compatible with 802.11 a/n devices
Supports 24V/1A PoE

Air Lakshya – 2.4 Ghz – 300mbps

This entry was posted in Air Pro Wireless

Product Specification:

Item Code: airlakshya
Wireless: 802.11N, 2T2R 300M MIMO Technolog
Memory: 64MB DDR2 RAM (128MB optional)
Flash: 8MB(16MB optional)
Interface: 2 10/100 Mbps RJ45 Port, support 12~24V PoE, 1 Reset Button, 1 DC Jack, 12V Power Supply
Antenna: 14dBi Panel Antenna

AIR Drona 2321 – 2.4 Ghz – 150Mbps

This entry was posted in Air Pro Wireless

Product Specification:

Item Code: airdrona2321
Standard: IEEE 802.11nIEEE 802.11gIEEE 802.11b
Frequency Band: 2.4GHz-2.4835GHz
Radio type: IEEE 802.11b: DSSS(CCK/DQPSK/DBPSK)IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n: OFDM(BPSK/QPSK/16-QAM/ 64-QAM)
Data Rate: 11n: up to 150Mbps(dynamic)11g: up to 54Mbps(dynamic)11b: up to 11Mbps(dynamic)
Access Protocol: CSMA/CACSMA/CDTCP/IPICMPNATPPPoE, DHCP , Wired static , Wi-Fi Client , UDP, DDNS

DLB Propeller 5

This entry was posted in Ligowave Wireless

Small size and high-gain wireless device with a patend pending mechanical antenna characteristics switching mechanism

Antenna Type: Directional Antenna, Highly Directional Antenna

Product Specification:

Item Code: DLBpro5
5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
80,000 PPS
170 Mbps capacity
High output power 29 dBm radio
Integrated directional 15 dBi panel antenna
Powerful OS

DLB MACH 5

This entry was posted in Ligowave Wireless

Powerful new generation CPU ensures better performance delivering higher up to 170 Mbps capacity and almost 2 X higher packet per second rate (80000). Narrow (5 and 10 MHz) channel support ensures steady performance in noisy environments. More RAM improves the performance with multiple users connected to a single base-station and larger flash stores a 2nd failover firmware image.

Product Specification:

Item Code: DLBMach5
5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
80,000 PPS
170 Mbps capacity
High output power 29 dBm radio
Integrated 23 dBi dual-polarized directional panel antenna
Powerful OS

APC Propeller 5

This entry was posted in Ligowave Wireless

Product Specification:

Item Code: apcpro5
5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
80,000 PPS
160 Mbps capacity
High output power 29 dBm radio
Directional offset dish antenna or an integrated panel antenna
Powerful OS

Echo 5D

This entry was posted in Ligowave Wireless

Product Specification:

Item Code: DLBEcho5d
5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
80,000 PPS
170 Mbps capacity
High output power 29 dBm radio
Directional offset dish antenna or an integrated panel antenna
Powerful OS

DLB PRO 5-90-17 ac Sector

This entry was posted in Antenna Ligowave Wireless

500+ Mbps throughput – the result of a powerful hardware platform with an 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9557 CPU (720 MHz), a QCA 9882 radio and 128 MBytes of RAM/Flash memory the LigoDLB PRO ac series access points are an ideal solution for resource demanding installations.

Product Specification:

Item Code: LigoDLB PRO 5-90-20 AC Sector
500+ Mbps capacity
500+ Mbps capacity
High power (30 dBm) radio
Proprietary protocol (iPoll)
Coverage distance: 7 km (4.35 mi)
Interfaces: 1 x 1000 Base-T (802.3af)

DLB PRO 5-90-20 AC Sector

This entry was posted in Antenna Ligowave Wireless

Product Specification:

Item Code: LigoDLB PRO 5-90-20 AC Sector
500+ Mbps capacity
High power (30 dBm) radio
Proprietary protocol (iPoll)
Zero loss design
Improved noise immunity (metal enclosure)
Integrated surge protection

Rapid Fire

This entry was posted in Ligowave Radio Wireless

A 5 GHz point-to-point system with exceptional performance that delivers 700+ Mbps throughput.

Product Specification:

Item Code: rapidfire
700Mbps TCP throughput
Supports up to 256 QAM
200,000 Packets per second
Channel sizes: 5, 10, 20, 40 and 80 MHz
Two Gigabit Ethernet ports with PoE pass-through up to ~ 13 watts

LigoDLB 5-20 AC

This entry was posted in Ligowave Wireless

500+ Mbps throughput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9882 radio and 64 MBytes of RAM and 16 MBytes of ash memory the, LigoDLB 5-20 ac series devices are an ideal solution for capacity demanding applications.

Product Specification:

Item Code: LigoDLB 5-20 ac
500+ Mbps capacity
High power (30 dBm) radio
Proprietary protocol (iPoll)
Zero loss design
Integrated surge protection
Lightweight design

LigoDLB 5-15 AC

This entry was posted in Ligowave Wireless

500+ Mbps mid-range wireless client500+ Mbps throughput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9882 radio and 64 MBytes of RAM and 16 MBytes of ash memory the, LigoDLB 5-15 ac series devices are an ideal solution for capacity demanding applications. State of the art RF design with great output power and sensitivity parameters improve range and capacity over the highest modulation – 256 QAM. The 24V Gigabit Ethernet port (passive PoE) allows utilizing the full capacity of the radio when used in a point-to-point or point-to-multipoint network design. LigoDLB ac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies over time.

Product Specification:

Item Code: LigoDLB 5-15 ac
500+ Mbps capacity
High power (30 dBm) radio
Proprietary protocol (iPoll)
Zero loss design
Integrated surge protection
Lightweight design

APC Sector 5-90

This entry was posted in Ligowave Wireless

Product Features:

Item Code:APC5-90
160 Mbps capacity
50,000 PPS
4.780 – 6.100 GHz support
High output power 29 dBm radio
Integrated 18 dBi sector antenna (90°)
Powerful OS

Router Board RB2011iAS-RM

This entry was posted in Mikrotik Router Board

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by Router OS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hot spot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by Router OS.

Product Specification

Item Code:RB2011iAS-RM
CPU nominal frequency: 600 MHz
SFP DDMI: Yes
CPU core count: 1
Size of RAM: 128 MB
10/100 Ethernet ports: 5
10/100/1000 Ethernet ports: 5
Number of USB ports: 1

Mikrotik Dish Antenna 30dbi

This entry was posted in Antenna Mikrotik Wireless

mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accommodate our Base box series products, but can be used for any pole mounted wireless device due to the adequate length of the included Flex Guide cable.

Two antennas are available, with a standard type mount (MTAD-5G-30D3), and with a precision alignment mount (MTAD-5G-30D3-PA). The antennas come packaged with all necessary accessories and cables.

Product Specification

Item Code:MTAD-5G-30D3<
Antenna gain DBI: 30dbi
Frequency Range: 4.7-5.875 GHz
Polarization: Vertical and Horizontal
Beam width: 3 deg
VSWR: ≤ 1.4 typ, ≤ 1.8 max
Port to Port Isolation: >40dB min
Front-to-Back Ratio: >30 dB

Dyna Dish 5

This entry was posted in Mikrotik Wireless

The DynaDish 5 is a new 802.11ac outdoor device with an integrated 25dBi antenna. Compact in it’s design, it is a simple and completely integrated product with everything you need to quickly install a reliable point to point link.

The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm.

Product Specification

Item Code:DynaDish5
CPU nominal frequency: 720 MHz
CPU core count: 1
Size of RAM: 128 MB
Wireless chip model: QCA9882
Wireless standards: 802.11a/n/ac
Number of USB ports: 0

QRT5

This entry was posted in Mikrotik Wireless

The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter.

Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless.

Easy to use and quick to deploy, QRT is ideal for point to point links.

Product Specification

Item Code:QRT5
Nominal frequency: 600 MHz
CPU core count: 1
Size of RAM: 64 MB
10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 1

SXT Lite5

This entry was posted in Mikrotik Wireless

Our best price/performance 5Ghz CPE. The SXT Lite5 (product code RBSXT5nDr2), 5Ghz 16dBi integrated antenna with 600MHz CPU, 64MB RAM and Router OS L3 installed.

SXT Lite5 is a low cost, high transmit power 5GHz outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations.

Antenna Type: Directional Antenna, Highly Directional Antenna

Product Specification

Item Code:sxtlite5

Router Board RB850G with casing

This entry was posted in Mikrotik Router Board

The RB850Gx2 is a five port Gigabit Ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures.

The device is powered by a 533MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor.

Product Specification

Item Code:RB850G
CPU nominal frequency: 533 MHz
CPU core count: 2
Size of RAM: 512 MB
Architecture: PowerPC
10/100/1000 Ethernet ports: 5
Memory Cards: 1

BaseBox 5

This entry was posted in Mikrotik Radio Wireless

The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device.

The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Product Specification

Item Code: BaseBox5
CPU nominal frequency: 600 MHz
CPU core count: 1
Architecture: MIPS-BE
Size of RAM: 64 MB
10/100 Ethernet ports: 0
10/100/1000 Ethernet ports: 1
MiniPCI slots: 0

Router Board RB750

This entry was posted in Mikrotik Router Board

The RB750 is a small five port Ethernet router in a nice plastic case.

Its price is lower than the RouterOS license alone – there simply is no choice when it comes to managing your wired home network, the RB750 has it all.

Not only it’s affordable, small, good looking and easy to use – It’s probably the most affordable MPLS capable router on the market! No more compromise between price and features – RB750 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.

Product Specification

Item Code: RB750
CPU nominal frequency: 400 MHz
CPU core count: 1
Size of RAM: 32 MB
10/100 Ethernet ports: 5
Power Jack: 1

Sector Antenna Mant 19s

This entry was posted in Antenna Mikrotik Wireless

The new sector mANT antennas are the perfect companion for the BaseBox, NetBox, NetMetal or any other outdoor wireless device. The mANT is a dual-polarization 19dBi 120 degree beamwidth antenna with two RP-SMA connectors. It comes with metallic U bolt type mounts.

Product Specification

Item Code: mANT19s
Antenna gain DBI: 19
Frequency Range: 5.17 – 5.825 GHz
Polarization: Vertical and horizontal
Beamwidth: 120 deg (azimuth) 5 deg (elevation)
VSWR: 1.43 typ, 1.8 max

OmniTik Wireless AP

This entry was posted in Mikrotik Wireless

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

Product Specification

Item Code: OmniTik

Rocket M5 AC Lite

This entry was posted in Radio Ubiquiti Wireless

The Ubiquiti airMAX Rocket M5 AC is the latest in the Rocket range with added 802.11ac for higher throughputs than other Rocket M5 models. The New Rocket AC can attach to any of the current rocket dish’s but to get the most from your PtP link the Rocket AC should be paired with the Rocket Dish AC. The Rocket AC comes as standard with 10/100/1000 Ethernet interfaces allowing the higher wireless link throughput of up to 450Mbps to be passed at both ends.

Product Specification

Item Code: R5AC-Lite
Dimension: 162 x 84 x 37 mm
Encryption: WPA2 AES Only
Frequence: 5.150 – 5.825 GHz
Output Power: 27 dBm
Interface : 10/100/100 LAN, WiFI
LAN port: 1x RJ45 10/100/1000 Mbps

Power Beam 5 AC 500

This entry was posted in Ubiquiti Wireless

Overview Ubiquiti Networks launches the Power Beam® ac ISO, an air MAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The Power Beam ac ISO directs RF energy in a tighter beam width, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the Power Beam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Radio Design Ubiquiti’s Inner Feed® technology integrates the radio into the feed horn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Product Specification

Item Code:PBE-5AC-400
airMAX ac Protocol Support
Long-Range Point-to-Point (PtP) Link Mode
Selectable Channel Width
PtP: 10/20/30/40/50/60/80 MHz
PtMP: 10/20/30/40 MHz
Automatic Channel Selection

Nanostation Loco M2

This entry was posted in Ubiquiti Wireless

150 Mbps real outdoor throughput and up to 15km range. Featuring 2×2 MIMO technology, the new Loco Station M links significantly faster and farther than ever before.

Product Specification

Item Code: M2-Loco
Processor Specs Atheros: MIPS 4KC, 180MHz
Memory Information: 16MB SDRAM, 4MB Flash
Networking Interface: 1 X 10/100 BASE-TX (Cat5, RJ45) Ethernet Interface
Approvals: FCC Part 15.247, IC RS210
RoHS Compliance: YES
Antenna: Integrated antenna array

Sector Antenna 5Ghz 20dbi 90°

This entry was posted in Antenna Ubiquiti Wireless

Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Product Specification

Item Code: AM-5G20-90
Dimensions: 700 x 135 x 70 mm (27.56 x 5.32 x x 2.76″)
Weight (Mount Included): 5.9 kg (13.01 lb)
Frequency: 5.15 – 5.85 GHz
Gain: 19.4 – 20.3 dBi HPOL
Beamwidth: 91° (6 dB) VPOL
Beamwidth: 85° (6 dB) Elevation

Bullet M5

This entry was posted in Radio Ubiquiti Wireless

5 GHz, air MAX® Technology Solutions Models: LBE-M5-23, Data sheet Light weight, Low-Cost Solution Full Adjustment Flexibility Quick Assembly and Installation

Product Specification

Item Code: LBE-M5-23
Networking Interface (1) 10/100 Ethernet Port
Antenna Gain 23 dBi Max
Power Output 25 dBm Max
Power Consumption 4W Power Supply 25V, 0.2A
PoE Adapter (Included)

LiteBeam M5 23dbi

This entry was posted in Ubiquiti Wireless

5 GHz, air MAX® Technology Solutions Models: LBE-M5-23, Data sheet Light weight, Low-Cost Solution Full Adjustment Flexibility Quick Assembly and Installation

Product Specification

Item Code: LBE-M5-23
Networking Interface (1) 10/100 Ethernet Port
Antenna Gain 23 dBi Max
Power Output 25 dBm Max
Power Consumption 4W Power Supply 25V, 0.2A
PoE Adapter (Included)

Power Beam M5-620

This entry was posted in Ubiquiti Wireless

Product Specification

Item Code: PBE-M5-620
High-Performance P2P Product
5 Ghz
150 mbps
Range: 25 km

Sector Antenna 5 Ghz 19dbi 120°

This entry was posted in Antenna Ubiquiti Wireless

Product Specification

Item Code: AM-5G19-120
Dimensions 700 x 135 x 73 mm (27.56 x 5.32 x 2.87″)
Weight (Mount Included) 5.9 kg (13 lbs)
Frequency 5.15 – 5.85 GHz Gain 18.6 – 19.1 dBi HPOL
Beamwidth 123° (6 dB) VPOL
Beamwidth 123° (6 dB) Elevation

Airgrid M5 23dbi

This entry was posted in Ubiquiti Wireless

Utilizing Inner Feed™ technology, the new air Grid™M HP Series from Ubiquiti Networks™ represents the latest evolution of outdoor wireless broadband devices. The revolutionary Inner Feed technology integrates the entire radio system into the feed horn of the antenna. air Grid M combines Ubiquiti’s Inner Feed and air MAX™ (TDMA protocol) technologies to create a simple, yet extremely powerful and robust wireless CPE (Customer Premises Equipment).

Product Specification

Item Code: AG-HP-5G23
Wireless innovation
Inner feed technology
Longer functional life

Rocket M5

This entry was posted in Radio Ubiquiti Wireless

The Rocket is a rugged, hi-power, very linear 2×2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP Airmax base-station applications.

Product Specification

Item Code : Rocket-M5
27 dBm +/- 2dB high power 802.11N Atheros SOC
MIPS 24KC, 400MHz
64MB SDRAM, 8MB Flash
1 x 10/100 Base-TX (Cat.5, RJ-45) Ethernet Interface
FCC Part 15.247, IC RS210, CE